Specifications

56
3.2 Laser Scanner (DT-X11M10E/M10RC)
3.2.1 Basic Specifications
The following industrial standard bar code symbologies are supported by the laser scanner
integrated in the terminal (model dependant).
Table 3.20 Supported symbologies
Symbology Check Digit Sum Min Digits Max Digits
EAN, JAN,UPC-A/B Enable/Disable 8 (fixed) 13 (fixed)
EAN, JAN,UPC-A/B Addon Enable/Disable 10 (fixed) 18 (fixed)
UPC-E Enable/Disable 7 (fixed) 7 (fixed)
UPC-E Addon Enable/Disable 9 (fixed) 12 (fixed)
Code39 Enable/Disable 2 (note 3) 47
NW-7 - 2 (note 4) 62
Interleaved 2of5 Enable/Disable 4 (note 5) 92
Industrial 2of5 Enable/Disable 2 55
Code93 Enable/Disable 1 77
Code128 Enable/Disable 1 98
MSI Enable/Disable (note 1) 1 67
IATA Enable/Disable (note 2) 1 (note 6) 44 (note 6)
RSS-14 Enable 14 (fixed) 14 (fixed)
RSS Limited Enable 14 (fixed) 14 (fixed)
RSS Expanded Enable 1 74 (note 7)
Notes:
1. MSI check digit
One of the three MSI check digit calculation methods can be selected.
- 1 digit, mod10
- 2 digit, mod10 and mode10
- 2 digit, mod10 and mod10
2. IATA check digit
One of the three IATA check digit calculation methods can be selected.
- Calculate number other than end 1 digit
- Calculate coupon number and numeric value segment
- Calculate numeric value segment
3. Minimum digit on Code39 symbology
The minimum no. of digits can be set to one only when scanning on Code39 symbology is
enabled.
4. Minimum digit on NW-7 symbology
The minimum no. of digits can be set to one only when scanning on NW-7 symbology is
enabled.
5. Minimum digit on Interleaved 2of5
The minimum no. of digits can be set to two only when scanning on Interleaved 2of5
symbology is enabled.