Specifications

53
FlashDisk
The Flash Disk has 128MB as its total capacity. The disk is released as user disk and can be
accessed as FlashDisk folder. The user disk is available to freely read/write user data such as user
application, master data, transaction data, etc.
The Flash Disk different from RAM does not require a power to back up data in the disk, so data
is not lost even if the terminal’s memory backup battery is exhausted. Be sure to back up
important data files in the RAM to the Flash Disk.
The storage manager in the Control Panel is used for formatting and its management for the Flash
Disk. It is approximately 120MB when the default settings are used to format on the disk. (The
size may alter depending on the Flash Disk conditions.)
If the disk cannot be recognized, it is automatically formatted. This failure to recognize the disk
may not mount the disk itself. The failure does not allow the storage manager in the Control Panel
to perform formatting, and consequently there is no way of mounting the disk again.
To avoid this difficulty, the disk is automatically formatted if it cannot be recognized at time of
resetting. Prior to starting the formatting, a message will appear to ask the user “Yes” or “No” to
continue.