Specifications

43
Table 3.4 Function key
KEY Input mode Operation Remarks
Character input mode Deletes 1 character to left.
F1/BS
Function mode
Initiate application registered in the registry below.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C1]
Default:sz (path of the application to be initiated)
Character input mode Perform as “Hyphen”.
F2/-
Function mode
Initiate application registered in the registry below.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C2]
Default:sz (path of the application to be initiated)
Character input mode Perform as “Period”.
F3/.
Function mode
Initiate application registered in the registry below.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C3]
Default:sz (path of the application to be initiated)
Character input mode
Input mode switchover
Numeric → Alphabet (U)→ Alphabet (L)
F4/Alpha
Function mode
Initiate application registered in the registry below.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C4]
Default:sz (path of the application to be initiated)
Table 3.5 Trigger key
KEY Input mode Operation Remarks
Starts reading symbols.
Can be set so that the user is informed of the fact the key is pressed.
T1/T2 ----
Turns ON the power if the key is pressed longer than the specified
period of time when the power is OFF.
Setting turning ON the power with key
The Power key and Trigger keys can be assigned to turn on the power (turning on the power and
then invoking application software). Application and function can be freely assigned to other keys
on the keyboard.
Setting the prohibition on turning on the power with key
The function to turn on the power with Trigger keys after the power has been turned off can be
disabled. Using the Common Device Control Library, turning on the power with Trigger keys can
be set enabled or disabled. The default setting is “Disable turning on the power”.