Specifications

218
Notes:
1. ECC200 88 x 88 sell (maximum)
2. Model 2 M version 20 (maximum)
Table 5.2 Angles
Angle (at distance of 120 mm away from the CMOS Imager)
1D (Code39 10mil (0.25mm)) ±35°
2D Stacked (PDF417 10mil (0.25mm)) ±35°
Pitch
2D Matrix (Aztec 20mil (0.5mm)) ±35°
1D (Code39 10mil (0.25mm)) ±40°
2D Stacked (PDF417 10mil (0.25mm)) ±40°
Skew
2D Matrix (Aztec 20mil (0.5mm)) ±35°
Dead zone ±5°( pitch, Skew )
1D (Code39 10mil (0.25mm)) 360°
2D Stacked (PDF417 10mil (0.25mm)) 360°
Tilt
2D Matrix (Aztec 20mil (0.5mm)) 360°
Table 5.3 Environment performances
Environment illumination 100 to 80,000lux
1D (Code39 10mil (0.25mm)) 0.45 or more 5 digits
2D Stacked (PDF417 10mil (0.25mm)) 0.45 or more 100 digits
PCS
2D Matrix (MaxiCode 35mil (0.889mm)) 0.45 or more 52 digits
V_Angle 26°
Angle
H_Angle 35°
High Temperature 50 ºC Operating temperature
(for the Imager sensor)
Low Temperature -20 ºC
Notes:
• All the specifications described in this chapter are assessed and defined under the basic
scanning conditions described in Table 5.3.
• The readable ranges described in Table 5.1 may fluctuate according to a kind of symbology.
• All the numbers of digits in Table 5.1 are defined with numeric only, not with alphanumeric
characters or ASCII characters which require different print utility software and software
parameter settings.
• Both recommended readable digits and maximum numbers of readable digits in Table 5.1 are
just reference. Note that print quality of the symbology and the surrounding environment
affect each no. of digits.