Specifications

209
4.3.2 Auto Setup
This utility automatically sets up a specified application.
Execution timing
The timing for executing “Auto Setup” is as follows.
• When the terminal is reset;
The utility executes Setup.exe, Restore.exe in FlashDisk or in the card directory.
• When PCMCIA or CF card is loaded;
The utility executes AutoRun.exe in the card directory.
Location of application for Auto Setup
Locations of applications to be automatically set up by this utility are as follows.
- FlashDisk
- CF card
- PCMCIA
The locations are in each CE\ARM folder of the locations.
Customizing in the registry
Performances of the “Auto Setup” can be automatically customized by changing the parameters in
the following registry.
[HKEY_LOCAL_MACHINE\Drivers\CASIO\UTIL]
Table 4.26
Key Setting Value Description
sz:”1”
Executes AutoRun.exe when an Storage Card2 is loaded.
AUTORUN
sz:”2”
Executes AutoRun.exe when a Storage Card is loaded
sz:”1”
Executes Setup.exe for the Storage Card at a time of reset on the terminal.
sz:”2”
Executes Restore.exe for the Storage Card at a time of reset on the
terminal.
sz:”3”
Executes Restore.exe for the Storage Card2 at a time of reset on the
terminal.
SETUP
sz:”4”
Executes Setup.exe for the Storage Card2at a time of reset on the terminal.
sz:”1”
Executes Setup.exe for the FlashDisk at a time of reset on the terminal.
FLSETUP
sz:”2”
Executes Restore.exe for the FlashDisk at a time of reset on the terminal.
Notes:
• Once the registry is deleted, the applicable application will not be automatically started up.
• The registry will be initialized to its factory setting by performing a full reset on the terminal.
• Since automatic startup of applications by the utility will be performed every time when a
reset is performed on the terminal or when a card is loaded, it should be avoided by controlling
the automatic startup for each applicable application.
Canceling Auto Setup on FlashDisk
If SetCancel.dat file resides in \FlashDisk\CE\ARM, the setup keys in FlashDisk can be
cancelled by pressing CLR key while the key input mode is Function mode.