Specifications

196
4.2.15 Image Scanner Read
After scanning 1D bar code symbol or 2D code symbol by the integrated imager, a result of the
scanning is output to application. The output method as well as other relevant parameters for
scanning can be determined by the settings made in “Settings”. To display the “Settings” menu,
tap the (
) icon in the Taskbar and then select Settings.
Operation Procedures
1. Tap Image Scanner Read icon in the Utility folder. As soon as the icon is tapped, it
appears in the Taskbar indicating that the application is being started up.
2. Start up an application that receives a result of scanning 1D bar code or 2D code symbol.
3. Scanning 1D bar code or 2D code symbol will take place when one of the Trigger keys is
pressed.
4. The scanning will end when the Trigger key is released or when the preset timeout elapses.
5. The scanning result will be output to the application.
Notes:
• To exit the image scanning application, tap the (
) icon in the Taskbar and then select Exit
menu.
• The clipboard output method copies data of scanning 1D bar code or 2D code symbol into the
clipboard by pasting it (by executing the keyboard event (Ctrl and V keys)). Therefore, data of
scanning cannot be output to application that does not support the paste operation (the
keyboard event (Ctrl and V keys)).
• These image scanning applications cannot run simultaneously with other application that
occupies the integrated imager.