Specifications

194
4.2.14 Image Scanner Demo
This application demonstrates the performances of reading 1D bar code and 2D code symbologies
with the integrated CMOS Imager (applicable to DT-X11M30E, DT-X11M30U and
DT-X11M30RC only). The application consists of four menus;
- Single Decode
- Multi Decode
- Image Capture
- Sign Capture
Single Decode
This mode reads a single bar code symbol every time one of the Trigger keys is pressed and then
displays scanned bar code, symbology and the no. of digits. To exit this mode, tap Quit button.
Fig. 4.92
Multi Decode
This mode reads specified no. of bar code symbols at a time and then displays each scanned bar
code in the respective boxes in Fig. 4.93. The no. of symbols to continuously scan can be
specified is either 2, 3 or 4.
Fig. 4.93