Specifications

193
4.2.12 Laser Scanner Demo
This application demonstrates the following scanning functions with the integrated laser scanner
(applicable to DT-X11M10E and DT-X11M10RC only).
• Automatic permission of setting readable bar code symbologies
• Scanning bar codes using one of the Trigger keys.
• Displaying scanning result in the screen (see Fig. 4.91).
Fig. 4.91
4.2.13 Laser Scanner Read
After scanning a bar code by the integrated laser scanner, a result of the scanning is output. The
output method for the scanning result will be defined by settings made in “Laser Setting”. To
display the “Laser Setting” menu, tap the ( ) icon in the Taskbar and select Setting.
Operation Procedures
1. Start up laser scanning. The (
) icon appeared in the Taskbar indicates that the scanning
application is being started up.
2. Start up an application that receives a result of scanning bar code.
3. Scanning a bar code will take place when one of the Trigger keys is pressed.
4. The scanning will end when the Trigger key is released or when the preset timeout elapses.
The scanning result will be output to the application.
Notes:
• To exit the laser scanning application, tap the (
) icon in the Taskbar and then select Exit.
• The clipboard output method copies data of scanning bar code into the clipboard by pasting it
(by executing the keyboard event (Ctrl and V keys)). Therefore, data of scanning cannot be
output to application that does not support the paste operation (the keyboard event (Ctrl and V
keys)).
• These laser scanning applications cannot run simultaneously with other application that
occupies the integrated laser scanner.