Specifications

192
Starting up Backup Tool as Command Line
The following shows a method to start up the backup tool as command line.
CF_Backup.exeT <option> <target> [<password>]
Parameters
option
B: Specifies the Backup.
R: Specifies the Restoration.
- Set up either “B” or “R”. It is not case-sensitive.
target
Directory that saves the backup file.
password
Password that has been specified. Specify it if necessary.
Notes
• Depending on the amount of data, operations of the backup and restoration may take several
tens of seconds to several minutes.
• Use dedicated AC adaptor to supply power to the terminal via cradle when performing the
backup.