Specifications

18
LAN Card
Used to perform communication by connecting to the 10BASE-T Ethernet environment.
• Permanent LAN connection (operating the terminal as desktop unit)
• Independent LAN connection (connecting the LAN cable or LAN card as required)
• Real-time upload/download of information
• Send and receive mail
• Security function (VPN (PPTP))
• To secure data, access is stopped when the battery pack cover is opened.
• The application should implement the function to disable Power OFF when Power key is
pressed during communication.
• Possible to automatically re-establish communication when the terminal is restored through
the resume operation.
• Sets up APO (disabled) to default to avoid interruption of in-progress communication.
Integrated WLAN Card (applicable to DT-X11M10RC and DT-X11M30RC)
Used to communicate in WLAN that is compatible with IEEE802.11b.
• Real-time upload/download of information
• Send and receive mail
• Security function
VPN (PPTP), WEP128/64bit, WPA PSK, WPA EAP (EAP-TLS, PEAP-EAP-TLS,
PEAP-MS-CHAP-V2, MD5)
• To secure data, access is stopped when the battery pack cover is opened.
• The application should implement the function to disable Power OFF when the Power key is
pressed during communication.
• Possible to automatically re-establish communication when the terminal is restored through
the resume operation.
• Sets up APO (disabled) to default to avoid interruption of in-progress communication.
• Transmission rate speed is 5 Mbps.
Printer
It is possible to send print data to any IrDA-compatible printer or Bluetooth-compatible printer.
The Bluetooth serial profile is supported by the terminal.
Cellular Phone
It is possible to dial-up any Bluetooth-compatible cellular phone without using a cable. The
Bluetooth dial-up profile is supported by the terminal.
Cradle-type Battery Charger
This is the Cradle-type Battery Charger on which the terminal is mounted for charging the
installed battery pack. It is possible to install it on a wall (in wall mount configuration) indoor.