Specifications

140
4.1.20 Mouse
This applet is for calibrating the interval of double-tap on the screen with stylus.
Double tap the grid in the right side of the upper screen to calibrate the double tap speed and its
interval. The set value can be checked by double tapping the icon in the right side of the lower
screen. See Fig. 4.41.
Fig. 4.41
4.1.21 Laser Setting
This applet is to change the settings for the integrated laser scanner (applicable to DT-X11M10E
and DT-X11M10RC only). For detail about each parameter, refer to Chapter 3.2 “Laser Scanner”.
Read barcode tab
This tab is for specifying bar code symbologies to scan. Multiple symbologies can be specified.
Fig. 4.42