Specifications

101
User Notification Methods
When VDET1 status occurs, the PBT_APMBATTERYLOW is issued periodically by
WM_POWERBROADCAST message to the application.
GetSystemPowerStatusEx2() API function is used to monitor voltage in application
capturing values listed below. Detailed values can be fetched using the WIN32 API.
- ACLineStatus
- BatteryFlag
- BatteryLifePercent
- BatteryChemistry
3.8.4 Power ON Factors
The followings are the power ON factors. These factors can be set enabled or disabled using the
Common Device Control Library.
• The Power key is pressed while the power is off.
• A time period set for the Alarm function has been elapsed.
• The terminal is mounted on the cradle while the power is being supplied by AC adaptor via
the cradle.
• Trigger key has been pressed.
Note:
Turning ON the power with the Power key cannot be controlled using the Common Device
Control Library.
Power ON Disable Factors
Factors that do not allow turning on the power are as follows.
• When the battery pack’s voltage level is not sufficient enough to start up the terminal (VDET2
level or lower).
• The battery cover lock is open.