User manual - 無線LAN導入マニュアル（AP側）ver.1.00(2003年4月7日)

DT-870/5100 DS 無線 LAN 設定マニュアル
29
無線部の設定準備
①画面１の状態から “s”と入力して [Setup]を選択します。
【画面２ Setup】
②画面２の状態から ”id a”[ENTER]と入力して[Id AP Radio]を選択します。
【画面３ ID AP Radio】
ここで、無線通信に必要な SSID の設定ができます。
無線部パラメータの初期値は以下のとおり
SSID = tsunami
===[Express Setup]===
Associations
[Defaults Associations] [Address Filters] [Advanced]
Event Log
[Defaults Event] [Event Handling] [Notifications]
Services
[Console/Telnet] [Boot Server] [Routing] [Name Server]
[Time Server] [FTP] [Web Server] [SNMP]
[Cisco Services] [Security]
Network Ports
[Id Ethernet] [Hw Ethernet] [Fltr Ethernet] [Adv Ethernet]
[Id AP Radio] [Hw AP Radio] [Fltr AP Radio] [Adv AP Radio]
___________________________________
[Home] - [Network] - [Associations] - Setup - [Logs] - [Help]
[END]
(Auto Apply On) :Back, ^R, =, <ENTER>, or [Link Text]:
AP340-48b145 AP Radio Identification Uptime: 02:58:02
[Primary Port?][_] [Adopt Primary Port Settings?][X]
MAC Addr. : 00:40:96:39:e0:0d
Default IP [Address ][10.0.0.2 ]
Default IP Subnet [Mask][255.255.255.0 ]
Current IP Address : 10.0.0.1
Current IP Subnet Mask : 255.255.255.0
[Service Set ID (SSID) ][tsunami ]
Firmware Version : 4.13
Boot Block Version : 1.43
[Apply] [OK] [Cancel] [Restore Defaults]
___________________________________
[Home] - [Network] - [Associations] - [Setup] - [Logs] - [Help]
[END]
(Auto Apply On) :Back, ^R, =, <ENTER>, or [Link Text]: