User manual - DT-300M60E

E-19
Scanning Bar Codes
Hold the Handheld Terminal close to small bar codes.
Hold the Handheld Terminal far away from large bar codes.
Warning!
■ Do not stare into the laser beam
● The Handheld Terminal uses a laser beam to scan bar codes.
Do not look directly into the laser beam, or allow it to shine into your eyes
under any circumstances.
About Warning Label
• This class 2 laser product warning label conforms with IEC
60825.
• The class 2 laser emission is only exposed momentarily, but
under no circumstances should you look directly into the
laser beam.
• Operations not mentioned in this guide are dangerous and
should not be done under any circumstances.
• The maximum laser output is less than 1 mW at a
wavelength of 650 nm.
LASER RADIATION
DO NOT STARE INTO
BEAM
Class 2 Laser Product
_: 650 nm
P: 1 mW
Margin Margin
Correct position
Incorrect position