User Manual

24
Network Connection Between a Single Projector and Multiple Computers
A C-Connection installer file and One Click Connection file downloaded to a particular computer can
be copied to and used by another computer. Distributing these files to other users simplifies the task
of connecting multiple computers to the same projector.
To use a copied file on other computers, perform the operation under “To project using a One Click
Connection file” (page 26) on each of the computers.
C-Connection includes a function that lets you add multiple projectors on a network to a Favorites list.
A Favorites list can be exported to a file, which can then be distributed among other users on the
same network. This helps to simplify network projection to specific projectors.
To add a projector to Favorites
1. On the computer, start up C-Connection.
2. Perform either of the operations below to search for the projector you want to
add for Favorites.
 Normally you should use operation (a). Use operation (b) when the projector you want is on a
subnet that is different from the computer you are using.
(a) On the C-Connection list panel (page 31), click .
(b) On the C-Connection list panel, perform the procedure from step 2 under “To project by
using a projector name or IP address to search for a projector” (page 29).
3. Move the mouse cursor to the line where the name of the projector you want to
add to Favorites is located, and then click the star ( ) on the right.
 This will cause the star to change to , which indicates that the projector was added to
Favorites.
To remove a projector from Favorites
1. On the computer, start up C-Connection.
2. On the C-Connection list panel (page 31), click .
3. Move the mouse cursor to the line where the name of the projector you want to
remove from Favorites is located, and then click the star ( ) on the right.
 This removes the projector from Favorites and removes the projector name from the list.
Creating a Projector Favorites List