User`s guide

9
How to use this Manual
• This section takes you through the basic label creation and printing process, using a
music CD label as an example.
The sections of this manual are arranged as shown below.
Refer to the indicated pages for details.
Getting Ready
• Unpacking (page 6)
• Installing the Software (page 16)
• Connecting to Your PC (page 19)
• Removing the Packing
Materials/Loading the Ink
Ribbon Cassette (page 21)
Label Making
with Preset Templates
Automated Label Layout (page 31)
• This section describes how to create
labels quickly and easily using preset
templates.
• You can select a music label, data label,
or digital image label template.
Creating an Original Label Layout
(page 54)
• This section describes how to layout text
and images to create exactly the type of
look you want.
• A Free Text label template gives you wide
ranging control over text you input into a
label.
• A Free Design label template provides
you with maximum freedom when
creating your label design.
Original Label Making
This section explains how to print a completed label.
• Simply place the CD-R onto the tray as instructed by the message that appears on the screen.
• This section also provides details about other settings.
Printing and Other Operations (page 67)
Troubleshooting Guide
(page 74)
• Check this section whenever you run into
problems.
• Here you will find details about online help
and error messages.
Label Making Overview (page 25)