Specifications

— 4 —
Other functions
Pitch bend range: Adjustable (12 semitones upwards and downwards)
Modulation: Equipped
Transpose: 25 steps (–12 semitones to +12 semitones)
Tuning: Adjustable (A4 = approximately 440Hz ± 50 cents)
Terminals
MIDI terminal: IN, OUT
Sustain/Assignable jack: Standard jack (sustain, sostenuto, soft, rhythm start/stop)
Headphones/Output: Stereo standard jack
Output Impedance: 250 Ω
Output Voltage: 5 V (RMS) MAX
12 V DC
Floppy disk drive
Type: 3.5" FDD
Formats: 2DD (720KB MS-DOS format)
2HD (1.44MB MS-DOS format)
Functions: Save and load of user tones, user rhythms, sequencer, and registration
data; playback of SMF; disk formatting; file delete; accompaniment pat-
tern style conversion
Power supply: Dual power supply system
Batteries Six D-size batteries
Battery life Approximately 3 hours continuous operation on alkaline batteries
AC adapter: AD-12
Auto power off: Turns power off approximately six minutes after last key operation. En-
abled under battery power only, can be disabled manually.
Speaker output: 5 W + 5 W
Power consumption: 12 V 18 W
Dimensions: 109.2 × 42.7 × 15.7 cm (43 1/16 × 16 13/16 × 6 3/16 inch)
Weight (without batteries): Approximately 9.2 kg (20.3 lbs)
Standard accessories: Music Stand; Pattern Conversion Disk; Data Disk; Disk User’s Guide;
Keyboard User’s Guide
ELECTRICAL
Current drain with 12 V DC:
No sound output 440 mA ± 20 %
Maximum volume 2000 mA ± 20 %
with 10 keys from C3 to E4 pressed in whistle tone
Volume: MAX., Velocity: MAX.
DSP0: Reverb1, FDD: Replay
Phone output level (Vrms with 8 Ω load each channel):
with tone Synth-Bass 4 tone L-ch (Key C4) 100 mV ± 20 %
Volume: MAX., Velocity: MAX. R-ch (Key F3) 92 mV ± 20 %
DSP0: Reverb1
Speaker output level (Vrms with 8 Ω load each channel):
with tone Synth-Bass 4 tone L-ch (Key D3) 7.1 mV ± 20 %
Volume: MAX., Velocity: MAX. R-ch (Key F3) 6.2 mV ± 20 %
DSP0: Reverb1
Output level (Vrms with 47 kΩ load each channel):
with tone Synth-Bass 4 tone L-ch (Key C4) 3200 mV ± 20 %
Volume: MAX., Velocity: MAX. R-ch (Key F3) 3100 mV ± 20 %
DSP0: Reverb1
Minimum operating voltage: 6.1 V