Owner`s manual

Music Data Management Software - Parameter Editor - Main Window - CASIO EUROPE
Mute Button
Click this button to toggle the corresponding channel
between being muted (button lit) and unmuted (button unlit).
Clicking this button does not affect any notes that are
already sounding when it is clicked.
DSP Button
Click this button to toggle the corresponding channel
between DSP line output (button lit) and non-DSP line
output (button unlit).
Synth Edit Button
Click this button to display the Synth window for the
corresponding channel. You can use the Synth window to
configure parameters of the tone assigned to the channel
whose [Synth Edit] button you clicked. The [Synth Edit]
button you click remains lit while the channel's Synth
window is displayed. If the Synth window is already
displayed, clicking the [Synth Edit] button again closes it.
Use the settings in this block to configure DSP (insertion effect) channel
settings.
DSP Type Section
DDSP Type Section
Use this box to select the DSP type. Selecting "200
Tone DSP" selects the DSP type of the last DSP
enabled tone that you used.
Name Box
This box shows the name of the currently selected
DSP.
Mixer Section
http://beta.casio-europe.com/euro/emi/cms/mdms/parametereditor/mainframe/ (7 of 10) [17.11.2006 11:56:51]