Owner`s manual

Music Data Management Software - Rhythm Converter - Making the SMF - CASIO EUROPE
Important Notes: These distinct parts of the Accompaniment Pattern are
referred to in Rhythm Converter as 'Elements'
You must set markers to define the different Elements
of the pattern. The markers must be set at the "Split
Points" between the Elements. (The measure number
at the start of each Element). This can be done in one
of two ways as detailed in How To Use Markers
Fill Ins must be one Bar in length and there must be no
empty bars between each Element in your SMF All of
the patterns Elements must be programed in the key of
C. The Intro and Ending can be based on a chord
progression, which should be in the key of C, or written
so that it resolves to the root of C. The Variations and
Fills must be written in the key of C Major.
Drums Channel 10
Bass Channel 11
Chord 1 Channel 12
Chord 1 Channel 13
Chord 1 Channel 14
Note: It is not necessary to fill every part, for example you could just use
Drums, Bass and Chord 1 to create a simple pattern. The important
point is that the parts must be on the above Midi Channels or the
pattern will not work properly.
Note On / Off
Modulation
Pitch Bend (Range = 2 Semitones)
http://beta.casio-europe.com/euro/emi/cms/mdms/rhythmconverter/smf/ (2 of 4) [17.11.2006 11:56:41]