Owner`s manual

Music Data Management Software - Wave Converter - Detailed Procedure - CASIO EUROPE
Once you've set the top note for a Split, the bottom note of the next Split to
the right is automatically set one note higher. So in the above example you
can see that B3 has been selected for split number 2, and the lowest note
for Split number 3 has automatically been set to C4.
With this system you only ever need set the highest note for each Split, the
lowest note of the following Split will always follow on.
You can also set the Split points by clicking on and dragging the vertical red
lines that show the Split points on the keyboard graphic:
One of the most important parameters you'll set with Wave Converter is
"Original Note". This is the original note of the wave in each Split. This is
important for two reasons:
http://beta.casio-europe.com/euro/emi/cms/mdms/waveconverter/procedure/ (4 of 8) [17.11.2006 11:56:39]