User Manual

Controlling the Sound of a Performance
EN-33
You can use the procedure below to adjust the volume level of the main tone and layer tone.
1. While holding down FUNCTION, press the A3 or B3 keyboard key.
• Do not release FUNCTION until step 2, below.
2. Use keyboard keys C4 through E5 to set the volume level.
• You can specify a volume value from 0 to 127.
• Each press of the + or – keyboard key changes the volume value by 1. Long-pressing either of
these keyboard keys scrolls the setting value.
• You can use keyboard keys 0 to 9 to enter a specific volume value.
Examples:
– To set a volume of 20, press 2, then 0. The volume setting will not change until you release
FUNCTION in step 3, below.
– To set a volume of 120, press 1, then 2, then 0. In this case, the volume value will change
as soon as you input the third digit.
• To return the setting to its initial default, press the – and + keyboard keys at the same time.
3. Release FUNCTION.
Adjusting the Volume Level of Each Part
C2 C3 C4 C5 C6
C7
A3 (Main part)
B3 (Layer part)
C2 C3 C4 C5 C6 C7
C4
C
C4
C4
C5
C5
C
C5
0123456789
＋−
D4
C{4
C4 E4 F4 G4 A4 B4 C5 D5 E5
E}4