Specifications

— 8 —
How to transfer the data
1. The slave unit must be set the date of Feb. 3rd, 1901 into the memory under the calculator mode.
Operation : ON OK 1 DATE 2 DATE 3 DATE M+
If you don't set the date, the "PASSWORD" isn't transferred to the slave unit.
2. Check the hardware parameters of both unit, and if the both units have another condition, reset
as follows;
MENU FUNC 2 3
3. Set up the slave unit.
• On the desktop, select the telephone icon
and press OK .
• Select the home icon and press OK .
• FUNC 2 2
4. Set up the customer's unit.
MENU FUNC 2 1 3 OK
If you can not succeed to transfer the data, press ESC key on both unit and try to transfer the data
again according to the above procedure.
RECEIVE OK!
TO STOP
PRESS [ ESC ]
DATA
OK