User manual - ClassPadII_Ex

Chapter 3: Graph & Table Application 17
7. Configure the following settings on the Dynamic Graph dialog box.
Setting Description
Modify: Manual Specifies whether graph modify should be performed manually using the cursor keys
(or graph controller arrows) or automatically.
Dynamic ]':
a
Specifies a variable whose value is changed when you press the left or right cursor
key, or tap the left or right graph controller arrow.
Start: 1
End: 5
These items specify the upper limit (End) and lower limit (Start) of the range of
change of the Dynamic ]' value.
Step: 2
Use this setting to specify the increment of change in the Dynamic ]' value when
you press the left or right cursor key, or tap the left or right graph controller arrow.
Dynamic `$:
b
Specifies another variable whose value is changed when you press the up or down
cursor key, or tap the up or down graph controller arrow.
Start: –2
End: 2
These items specify the upper limit (End) and lower limit (Start) of the range of
change of the Dynamic `$ value.
Step: 1
Use this setting to specify the increment of change in the Dynamic `$ value when
you press the up or down cursor key, or tap the up or down graph controller arrow.
8. Tap [OK].
• This displays a WARNING dialog box for overwriting variable
a. Tapping [OK] displays a dialog box warning
that you are about to overwrite variable
b. Tap [OK].
• This graphs the functions using the
a and b variable start values you specified on the Dynamic Graph
dialog box, and displays “Modify” on the Graph window.
9. Modify the graphs by changing the value of variable
a or b.
• To change the value of variable
a, press the left or right cursor key, or tap the left or right graph controller
arrow.
• To change the value of variable
b, press the up or down cursor key, or tap the up or down graph controller
arrow.
10. To quit graph modification, tap l on the icon panel.
Tip: Try performing the above procedure while selecting Modify: Auto in step 7.
LY777Ex_E.indb 17 13/02/25 11:23