User Manual

20170101

2-5-1

Transferring Data between ClassPad and a Computer

2-5 Transferring Data between ClassPad and a

Computer

Establishing a USB connection between ClassPad and a computer will cause the computer

to recognize the ClassPad’s mass storage area as a USB Flash Drive. After a connection

is established, data can be transferred between ClassPad and computer using computer

operations only.

Connecting and Disconnecting with a Computer in the USB Flash Mode

Important!

Never touch the USB cable plugs and screen while a data communication operation

is in progress. Static electricity from your fingers can cause data communication to be

terminated.

To establish a connection between ClassPad and a computer

(1) Start up your computer.

(2) After starting up your computer, use the USB cable to connect it to the ClassPad.

• The ClassPad will turn on automatically and the “Select Connection Mode” screen will

appear.

(3) Tap [USB Flash].

• Establishing a connection between the ClassPad

and a computer will cause the screen shown nearby

to appear.

(4) On your computer, open the ClassPad drive.

• The ClassPad drive represents ClassPad’s mass storage area.

(5) Perform the required operation on your computer to transfer the data.

• For details about data transfer operations, see “Transferring Data” (page 2-5-3).

•