For ClassPad 300/ClassPad 300 PLUS OS Update (ClassPad OS Version 2.20) Application User’s Guide RJA510188-4 http://world.casio.com/edu/ http://classpad.
OS Update Application OS Update Application performs a multi-step process that performs the following operations. • Backup of data currently in the memory of your ClassPad • Update of your ClassPad to Version 2.20 • Restoration of the backed up data Important! • The new ClassPad OS provides users with new solutions and superior display performance. However, once ClassPad OS has been updated, it cannot be returned to a version of ClassPad OS earlier than version 2.20.
Contents 1. Prepare the ClassPad OS Update data on your computer. ........................... E-3 2. Install the ClassPad USB driver on your computer. ...................................... E-6 3. Back up the data that is currently in the memory of your ClassPad. .......... E-7 4. Install the ClassPad OS Update on your ClassPad. ...................................... E-8 5. Re-configure ClassPad settings. ..................................................................... E-9 6.
1 Prepare the ClassPad OS Update data on your computer. 1. On your computer, double-click “ClassPad 300 OS Ver.02.20.3000 Update” or “ClassPad 300 OS Ver.02.20.3000 Update.exe”. 2. Click [Yes]. 3. Click the [Next] button to advance to the next screen. 4. Carefully read the terms and conditions of the license agreement.
1 Prepare the ClassPad OS Update data on your computer. 5. If you agree to the terms and conditions of the license agreement, click “I accept the terms...”, and then click the [Next] button. • If you do not agree to the terms and conditions of the license agreement, click “I do not accept the terms ...” and then click the [Cancel] button to exit the install procedure. Carefully read the terms and conditions of the important information. 6.
1 Prepare the ClassPad OS Update data on your computer. 8. Use the USB cable that comes with your ClassPad to connect to the computer. Important! • Never disconnect the USB cable unless specifically instructed to do so. Doing so can cause the calculator to malfunction. 9. What you should do next depends on what appears on your computer screen. • If the Found New Hardware Wizard dialog box appears This means your computer does not have the ClassPad USB driver installed.
2 Install the ClassPad USB driver on your computer. This step is necessary only if the Found New Hardware Wizard dialog box appears when you connected the ClassPad to your computer. Select “No, not this time”. (Windows XP SP2 only) 1. Select “Install the software automatically (Recommended)” and then click [Next]. (Windows XP only) 2. Though a message appears to let you know that the software has not passed the “Windows Logo Test”, there is no need for concern.
3 Back up the data that is currently in the memory of your ClassPad. Data backup starts automatically after you finish performing the steps required up to this point. • Never disconnect the USB cable unless specifically instructed to do so. Doing so can cause the calculator to malfunction. The screen shown below appears when data backup is complete. 1. On your ClassPad, tap [OK]. 2. Next, perform the steps under “4. Install the ClassPad OS Update on your ClassPad” on page E-8.
4 Install the ClassPad OS Update on your ClassPad. Perform the following steps on your ClassPad to update its operating system. • The dialog box guides you through the operations you need to perform on your ClassPad. 1. On the [Link] menu, tap [Install] and then [OS Update]. 2. Tap [OK] to start updating of the operating system. • Never disconnect the USB cable unless specifically instructed to do so. Doing so can cause the calculator to malfunction. 3. Next, perform the steps under “5.
5 Re-configure ClassPad settings. The screen shown below appears when operating system updating is complete. This area guides you through the operations you need to perform on your ClassPad. After its operating system is updated, your ClassPad should display the Touch Panel Alignment screen. • The dialog box guides you through the operations you need to perform on your ClassPad. 1. Tap the center of each of the four cross marks as they appear on the display.
5 Re-configure ClassPad settings. 3. On the next screen that appears, tap the language you want to use as the system language, and then tap [Set]. • Tapping [Cancel] selects English and advances to the next screen. 4. On the next screen that appears, tap the key arrangement you want to use, and then tap [Set]. • Tapping [Cancel] selects QWERTY arrangement and advances to the next screen. 5. On the next screen that appears, tap the font set you want to use, and then tap [Set].
6 Restore the data that you backed up in section 3. Perform the following steps on your ClassPad to restore data. • The dialog box guides you through the operations you need to perform on your ClassPad. 1. Scroll down the application menu and then tap B to start up the Communication application. 2. Tap . 3. On your ClassPad, tap [OK]. 4. Next, perform the steps under “7. Finalize the installation update procedure” on page E-12.
7 Finalize the installation update procedure. The screen shown below appears when OS update is complete. 1. Click [Finish]. 2. Click [Finish]. 3. Disconnect the ClassPad from your computer.
CASIO COMPUTER CO., LTD.
