Specifications

— 24 —
14. DISASSEMBLY AND EXPLODED VIEW
1. Loosen both J and M screws on the battery covers K and L after removing the hard case l
from the body, and remove the battery covers and batteries.
2. Loosen the four screws N on the lower case E, and remove this lower case from the body.
3. Remove one end of the PC joiner D from the L392-1 assembly 1 with the help of fusing its
weld.
4. Loosen the two screws j on the L392-1 assembly 1 and the four screws j on the LCD holder
3, then remove the L392-1 assembly 1 from the upper case U.
5. Loosen the six screws j on the L392-2 assembly, and remove the L392-2 assembly from the
upper case U.