Specifications

— 19 —
To Set CFX-9800G Parameters
Starting from the LINK Mode:
F6
(SET) (or
SHIFT
SET UP
)
• This display shows the currently set parameters.
Press the function key that corresponds to the parity you want to set.
Press to select BPS.
Press the function key that corresponds to the communication speed you want to set.
Press
EXIT
to complete the procedure and return to the previous function menu.
11-4. Using ALL, Range, and Factor
The following procedures show how to send data using ALL, Range, and Factor from one CFX-
9800G unit to another. The example procedure shows an operation using ALL only, but the proce-
dures for Range and Factor are identical.
12
F1 F2 F3
BPS : 9600
24 48 96
<×100>
F4
EVN ODD NON
PARITY : EVEN
BPS
: 9600
M–D/Cpy
: M–Disp
F1 F2 F3
RECEIVE DATA
ALL
Program
Editor
Function Memory
Matrix
Statistics
Variable Memory
= = RECEIVE = =
ALL DATA
YES
NO
F1 F6
Receive Unit
Starting from the LINK Mode, press the function key
to enter the receive mode.
F2
(RCV)
Make sure that the pointer is located at ALL, and
press
EXE
to specify it as the data type.
EXE
Press
F1
(YES) to start the receive operation, or
F6
(NO) to abort without receiving anything.
• To send data using ALL
Send Unit
Starting from the LINK Mode, press the function
key to enter the send mode.
F1
(TRN)
Make sure that the pointer is located at ALL, and
press
EXE
to specify it as the data type.
EXE
Press
F1
(YES) to start the send operation, or
F6
(NO) to abort without sending anything.
= = TRANSMIT = =
ALL DATA
YES
NO
F1 F6
TRANSMIT DATA
ALL
Program
Editor
Function Memory
Matrix
Statistics
Variable Memory