User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Playing on the Keyboard
- Controlling Sounds
- Playing a Built-in Song or a Song on a USB Flash Drive
- Using Auto Accompaniment
- Using Music Preset
- Registering and Restoring a Setup (Registration)
- Recording Your Keyboard Play
- Configuring Function Settings
- USB Flash Drive
- Connecting External Devices
- Connecting to a Computer
- Connecting to Audio Equipment
- Linking with a Smart Device (APP Function)
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Connect the Digital Piano with a Bluetooth Low Energy MIDI Device
- Enabling and Disabling the Digital Piano’s Wireless Function
- Adjusting the Notification Tone Volume Level
- Checking the Bluetooth Connection Status
- Reference
- MIDI Implementation Chart
EN-57
Connecting External Devices
There are two ways to connect with a smart device: connect
via the Bluetooth function and/or use a commercially available
USB cable.
• If you are using a CASIO smart device app, do not have
the Digital Piano connected with the smart device
using the Bluetooth function and a USB cable at the
same time.
■ Using the Bluetooth Function to Link the Digital
Piano with a Smart Device
You can use the Wireless MIDI & audio adaptor for the
Bluetooth function linking.
1.
Referring to “To download the smart device
app” (page EN-56), install the app on the smart
device.
2.
Plug the Wireless MIDI & audio adaptor into the
Digital Piano’s cr USB Type A port (page
EN-10).
• After connecting the smart device to the Digital Piano,
use the smart device app to perform operations. For
details about operations, refer to the user
documentation of the app.
• Do not perform any Digital Piano operation while it is in
the process of connecting with the smart device app.
• With a Bluetooth connection, some communication
environments and use of smart device functions may
cause a noticeable sound distortion. If this happens,
try the countermeasures below.
− Refer to the app’s user documentation for
information about MIDI playback quality.
− If your smart device is connected by Wi-Fi to another
device, turn off the smart device Wi-Fi.
− Use a cable connection instead of Bluetooth.
■ Using a Cable to Connect the Digital Piano with a
Smart Device
1.
Referring to “To download the smart device
app” (page EN-56), install the app on the smart
device.
2.
Use a commercially available USB cable to
connect the smart device port to the Digital
Piano cs USB Type B port.
• After connecting the smart device to the Digital Piano,
use the smart device app to perform operations. For
details about operations, refer to the user
documentation of the app.
• Put the mobile device you will connect with into its
Airplane Mode or otherwise disable device
communications.
• When connecting a smart device to the Digital Piano,
do not connect both a USB cable and an audio cable at
the same time.
• Connect using a USB cable that is no more than two
meters long.
Connecting with a Smart Device
Smart Device
Wireless MIDI & audio adaptor
cr USB Type A port