User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Playing on the Keyboard
- Controlling Sounds
- Playing a Built-in Song or a Song on a USB Flash Drive
- Using Auto Accompaniment
- Using Music Preset
- Registering and Restoring a Setup (Registration)
- Recording Your Keyboard Play
- Configuring Function Settings
- USB Flash Drive
- Connecting External Devices
- Connecting to a Computer
- Connecting to Audio Equipment
- Linking with a Smart Device (APP Function)
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Connect the Digital Piano with a Bluetooth Low Energy MIDI Device
- Enabling and Disabling the Digital Piano’s Wireless Function
- Adjusting the Notification Tone Volume Level
- Checking the Bluetooth Connection Status
- Reference
- MIDI Implementation Chart
EN-43
Recording Your Keyboard Play
4.
Use bn PART SELECT to select the part
whose playback you want to mute during
recording.
• Each press of bn PART SELECT cycles between the
mute settings as shown below. On-screen indicators
show the currently muted part(s).
• Configure tone and tempo settings at this time as well.
5.
Press bma to start song playback and
recorder recording.
Play along with the playback.
• To stop recording part way through, press bma.
6.
Recording will stop automatically when the
end of the song is reached.
This will enter playback standby.
7.
Press bma.
This will start playback of what you recorded.
• Each press of bma starts and stops playback.
The precount and metronome settings shown below are
available for recording.
■ To configure precount and metronome settings
1.
While in record standby, long-press
5 RECORD/STOP.
This displays “Rec Trk”.
2.
Use the bo dial to display the item whose
setting you want to configure.
• To configure the precount setting, display “Precount”.
To configure the metronome setting, display
“Metronom”.
3.
Press bp ENTER to enable or disable the
displayed setting.
• Each press of bp ENTER toggles the setting between
enabled and disabled.
4.
To exit the setting screen, press 5 RECORD/
STOP.
Right-hand part muted
Left-hand part muted
Both hand parts muted
Displayed
Configuring Precount and
Metronome Settings
Precount
(Precount)
Specifies whether or not to sound a pre-count
before recording starts after you press
bm START/STOP while in recording
standby.
On: Sounds a one-measure pre-count.
Off: Recording starts without sounding a pre-
count as soon as you press bm START/
STOP or play something on the keyboard.
Metronome
(Metronom)
On: Sounds the metronome while recording.
Off: Disables the metronome.