User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Playing on the Keyboard
- Controlling Sounds
- Playing a Built-in Song or a Song on a USB Flash Drive
- Using Auto Accompaniment
- Using Music Preset
- Registering and Restoring a Setup (Registration)
- Recording Your Keyboard Play
- Configuring Function Settings
- USB Flash Drive
- Connecting External Devices
- Connecting to a Computer
- Connecting to Audio Equipment
- Linking with a Smart Device (APP Function)
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Connect the Digital Piano with a Bluetooth Low Energy MIDI Device
- Enabling and Disabling the Digital Piano’s Wireless Function
- Adjusting the Notification Tone Volume Level
- Checking the Bluetooth Connection Status
- Reference
- MIDI Implementation Chart
Controlling Sounds
EN-24
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
• The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.
• You can change the frequency in 0.1 Hz steps.
1.
Press bp FUNCTION and then use the bo dial
to display “Tune”.
2.
Press bp ENTER.
This displays the NUM indicator.
3.
Use the bo dial to adjust tuning.
4.
Press bp ENTER to apply your setting.
This causes the NUM indicator to disappear.
5.
To exit the setting screen, press bq TONE.
Octave Shift lets you raise or lower the pitch of the keyboard
notes of each part (page EN-15) in octave units.
• The octave shift setting range is –2 to +2 octaves.
1.
Keep pressing co LAYER until the screen
shown below appears on the display.
2.
Use the bo dial to select the part whose pitch
you want to change.
3.
Press bp ENTER.
This displays the NUM indicator.
4.
Use the bo dial to shift the octave.
5.
Press bp ENTER to apply your setting.
This causes the NUM indicator to disappear.
6.
To exit the setting screen, press bq TONE.
• This Octave Shift setting changes automatically when some
tones are selected. For details, see the “Key Octave Shift”
column of the tone list in the separate “Built-in Music Data
Lists”.
Fine Tuning a Pitch (Tuning)
T u n e
4 4 0 . 0 H z
Changing the Pitch in Octave
Units (Octave Shift)
To select this tone part: Displays this indicator:
Upper1 part U1 Oct.
Upper2 part U2 Oct.
Lower part L Oct.
U1 Oc t .
U2 Oc t .