CDP-240R USER’S GUIDE Please keep all information for future reference. Safety Precautions Before trying to use the Digital Piano, be sure to read the separate “Safety Precautions”. MODE D’EMPLOI Conservez en lieu sûr pour toute référence future. Consignes de sécurité Avant d’utiliser le piano numérique, veuillez lire les « Précautions concernant la sécurité » imprimées séparément.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Important! • Before using the AD-A12150LW Adaptor to power the product, be sure to check the AC Adaptor for any damage first. Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged. • The product is not intended for children under 3 years. • Use only CASIO AD-A12150LW adaptor. • The AC adaptor is not a toy. • Be sure to disconnect the AC adaptor before cleaning the product.
Contents General Guide ...........................EN-4 Using the 10-key Pad ( ).............................. EN-7 FUNCTION Button ( ) Functions ................. EN-7 Returning the Digital Piano to Its Factory Default Settings ............................. EN-8 Getting Ready to Play ..............EN-9 Preparing the Music Stand .............................. EN-9 Connecting a Pedal Unit.................................. EN-9 Power Supply ..................................................
Contents Recording Your Keyboard Play ..........................................EN-49 Connecting External Devices ................................... EN-64 Recording and Playing Back Keyboard Play ............................................... EN-49 Using Tracks to Record and Mix Parts .......... EN-50 Recording Two or More Songs, and Selecting One for Playback .................... EN-52 Recording while Playing Along with a Built-in Song ...............................................
General Guide • In this manual, the term “Digital Piano” refers to the CDP-240R. • In this manual, buttons and other controllers are identified using the numbers shown below.
General Guide • The following explains the meaning of the $ symbol that appears on the product console and with the key names below. $ : Indicates a function that is enabled by holding down the button for some time. For example, METRONOME, BEAT $ means that the BEAT function is enabled by holding down the button for some time.
General Guide ■ Back dp dq dr ds SD CARD SLOT ☞EN-59 USB port ☞EN-64 SUSTAIN/ASSIGNABLE JACK ☞EN-9 AUDIO IN jack ☞EN-68 EN-6 dt ek el em DC 12V terminal ☞EN-9 PHONES/OUTPUT jack ☞EN-10, 68 MIC IN/SAMPLING jack ☞EN-18 MIC VOLUME knob ☞EN-18
General Guide Using the 10-key Pad ( ) Function Use the number buttons and the [–] and [+] keys to change the settings of the parameters that appear in the upper left area of the display. Setting S t . G r Pn o Use the number buttons to enter numbers and values. • Enter the same number of digits as the currently displayed value. Example : To enter tone number 001, input 0 3 0 3 1. • Negative values cannot be input using the number buttons. Use [–] (decrease) and [+] (increase) instead.
General Guide Returning the Digital Piano to Its Factory Default Settings Perform the following procedure when you want to return the Digital Piano’s stored data and settings to their initial factory defaults. 1. Turn off the Digital Piano. 2. While holding down (SONG BANK) and the [1] 10-key ( ) key at the same time, press . ) key • Keep (SONG BANK) and the [1] 10-key ( depressed until the next step is complete. 3.
Getting Ready to Play Preparing the Music Stand Music stand Note the following important precautions to avoid damage to the power cord. During Use • Never pull on the cord with excessive force. • Never repeatedly pull on the cord. • Never twist the cord at the base of the plug or connector. During Movement • Before moving the Digital Piano, be sure to unplug the AC adaptor from the power outlet.
Playing the Digital Piano 1 bp 2 9 br ck bm Turning on Power and Playing Auto Power Off If you do not perform any operation for 30 minutes, the Digital Piano will turn off automatically. 1. Press (P). This turns on power. • To turn off the Digital Piano, press again. 2. Try playing something on the keyboard. Use to adjust volume. ■ Disabling Auto Power Off You can disable Auto Power Off to ensure that power is not turned off automatically during a concert, etc. 1.
Playing the Digital Piano Changing Keyboard Response to Touch Pressure (Touch Response) Touch Response alters tone volume in accordance with keyboard pressure (speed). This provides you some of the same expressivity you get on an acoustic piano. Changing Touch Response Sensitivity Use the procedure below to control how much the volume of played notes change in accordance with playing speed. Select the setting that best matches your playing style. 1.
Playing the Digital Piano Using the Metronome The metronome lets you play and practice along with a steady beat to help keep you on tempo. Changing the Metronome Tempo Use the following procedure to change the tempo of the metronome. 1. Press . Start/Stop 1. Press . This starts the metronome. This pattern changes with each beat. Use w (slower) and q (faster) to change the tempo setting. Holding down either button changes the setting at high speed.
Controlling the Keyboard Sounds bp br bs bt ck cr cs Select from a variety of musical instrument sounds 3. Try playing something on the keyboard. The tone of the instrument you selected will sound. Your Digital Piano lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type. To select an instrument for playing 1. Press (TONE).
Controlling the Keyboard Sounds Layering Two Tones You can use the following procedure to layer two different tones (such as piano and strings) so they sound simultaneously when you press a keyboard key. 1. Select the first tone you want to use. Press (TONE) and then use tone you want. Example: 038 ELEC.
Controlling the Keyboard Sounds 5. Pressing again to unsplit the keyboard (so it plays only the tone you selected in step 1). • Each press of toggles between split (two tones) and unsplit (one tone). Using Reverb Reverb adds reverberation to notes. You can change the duration of the reverb. 1. Press (FUNCTION) and then use the • If you turn on both layer and split, layering will be applied to the right side range of the keyboard only.
Controlling the Keyboard Sounds Using a Pedal A pedal can be used to change notes in various ways while playing. Selecting the Pedal Effect 1. Press (FUNCTION) and then use the (10-key) [4] (U) and [6] (I) keys to display “OTHER” (page EN-7). Changing the Pitch (Transpose, Tuning, Octave Shift) Changing the Pitch in Semitone Steps (Transpose) The transpose feature lets you change the pitch, in semitone steps. A simple operation lets you instantly change the pitch to match that of a singer.
Controlling the Keyboard Sounds Octave Shift Octave Shift lets you raise or lower the pitch of the keyboard notes in octave units. • The octave shift setting range is –2 to +2 octaves. • When using Split (page EN-14), you can individually set the left and right keyboard ranges to the pitches you want. 1. Keep pressing until the screen shown below Using the Pitch Bend Wheel to Shift the Pitch of Notes You can use the pitch bend wheel to slide the pitch of notes smoothly upwards and downwards.
Sampling Sounds and Playing Them on the Digital Piano bo bp bk You can use the Digital Piano to sample a sound from a microphone, and then play the sound with keyboard keys. For example, you could sample the bark of your dog and then use the sound in a melody. The sampling feature is a great way to create new sounds that are highly creative. Connection and Preparation br bt ck cl cm cn co cp cq 2. Turn the volume levels of the Digital Piano down. 3. Turn on the microphone and then the Digital Piano.
Sampling Sounds and Playing Them on the Digital Piano Sampling and Playing a Melody Sound (Melody Sampling) Use the procedures in this section to sample a sound and play it as the melody part on the Digital Piano. • Up to five sampled sounds can be stored in Digital Piano memory as tone numbers 701 through 705. Simply select the tone number where the sound you want is located to assign the sound to the keyboard. To sample a sound 1.
Sampling Sounds and Playing Them on the Digital Piano ■ How sampled sounds are played Pressing Middle C (C4) will play back the original sound. The keys to the left and right of C4 play the sound at different pitches. Changing the Volume of Sampled Sound Looped Playback You can use the following procedure to change the volume level of the looped playback of each sampled sound, if you want. 1. Press the button of the sampled sound whose volume you want to change ( C4 2.
Sampling Sounds and Playing Them on the Digital Piano Applying Effects to a Sampled Sound You can apply various effects to sampled sounds. 1. Press (TONE) and then use (10-key) to enter the tone number (701 to 705) to which you want to apply effects. 2. Press (TONE) to cycle through the available effects, described below. Effect Type (Display) Original (Orgnl) Description Normal sampled tone (no looping, no effect). Loop 1 (Loop1) Loops the sampled sound.
Sampling Sounds and Playing Them on the Digital Piano 4. Press the keyboard key* to which you want to assign the drum sound you are about to sample. This enters sampling standby. The allowable sampling time (in seconds) will appear on the display momentarily and then the display will change to the following. Wa i t i n 6. After the sound you want to sample is finished, press . Sm p l D r m1 Used memory (Unit: Kbytes) Remaining memory capacity g Sampling will stop.
Sampling Sounds and Playing Them on the Digital Piano Editing Sampled Drum Set Sounds You can use the procedures in this section to copy the drum sound assigned to one keyboard key to another key, to change the pitch of a sound, and to delete a sampled sound. 1. Press (TONE) and then use (10-key) to enter the tone number (706, 707, or 708) for the drum set you want. 2. Hold down until the SAMPLING indicator starts to flash.
Sampling Sounds and Playing Them on the Digital Piano Other Sampling Functions Changing to a Manual Sampling Start Normally when the Digital Piano is in sampling standby, it will start sampling automatically whenever it detects sound input. You can use the following procedure to enable manual sampling start, which will cause sampling to wait until you press a button to start it. You can use this to insert silence before the sampled sound. 1.
Sampling Sounds and Playing Them on the Digital Piano Deleting a Sampled Sound You can use the following procedure to specify a sampled tone number and delete its data. 1. Press (FUNCTION) and then use the (10-key) [4] (U) and [6] (I) keys to display “DELETE” (page EN-7). Flashes Protecting Against Accidental Deletion of Sampled Sounds You can use the following procedure to protect each sampled sound against accidental deletion. 1.
Playing Built-in Songs bn 345678 • In addition to simple listening enjoyment, the built-in songs can be used with the lesson system (page EN-30) for practice. • You can increase the number of tunes using your memory cards (page EN-61) or computer (page EN-67). • If Auto Power Off (page EN-10) is enabled, the Digital Piano will turn off if 30 minutes (six minutes under battery power) elapsed without any keyboard operation being performed.
Playing Built-in Songs 3. Press . ■ Skip Back This starts playback of the song. Beat Note Key Sustain pedal 1. Press . This skips song playback back to the previous measure. Each press of skips back one measure. Holding down skips back at high speed until you release it. • Pressing while song playback is stopped performs lesson function phrase skip back (page EN-31).
Playing Built-in Songs 3. When playback reaches the measure you want to select as the end measure, press again. This specifies the measure as the end measure and starts repeat playback of the measures in the specified range. • During repeat play you can use to pause playback, to skip forward, or to skip back. Lights Adjusting the Song Volume Use the following procedure to adjust the balance between the volume of what you play on the keyboard and song playback volume. 1.
Playing Built-in Songs Turning Off the Part of One Hand for Practice (Part Select) You can turn off the right hand part or the left hand part of a song during playback and practice playing along with the remaining part. 1. Press to select the part you want to turn off. Each press of below. Increasing the Selection of Songs You can load song data from an external device and increase the selection of songs available on the keyboard. See the following pages for more information.
Using Built-in Songs to Master Keyboard Play bn 345 78 br cl cm cn co cp To master a song, it is best to break it up into shorter parts (phrases), master the phrases, and then put everything together. Your Digital Piano comes with a Step Up Lesson feature that helps you to do just that. Phrases The built-in songs are pre-divided into phrases to help you master keyboard play.
Using Built-in Songs to Master Keyboard Play Messages that Appear during Lessons The following are the messages that appear on the display during Step Lessons. Message Description Appears when you select a phrase, when a lesson starts, etc. • Note that certain phrases will cause “” to appear instead of “”. 2. Press (or ) to move forward one phrase, or to move back one phrase. • Holding down or scrolls through phrases at high speed.
Using Built-in Songs to Master Keyboard Play Lessons 1, 2, and 3 Now it is time to start the lessons. First, select the song and part you want to practice. Master playing the correct note with the correct finger as instructed by the guidance. Practice playing with the correct timing. Lesson 1: Listen to the song. First, listen to the example a few times to familiarize yourself with what it sounds like. 1. Press . This starts example play.
Using Built-in Songs to Master Keyboard Play Lesson 3: Remember what you learned as you play. Though song playback stands by waiting for you to press the correct keys as in Lesson 2, the Digital Piano does not provide any guidance about what note you need to play next. Remember everything you have learned up to Lesson 2 as you play. Lesson Settings Playing without Phrase Repeat You can turn off phrase repeat for Lessons 1, 2, and 3. 1. Press . This disables phrase repeat play. 1. Press .
Using Built-in Songs to Master Keyboard Play Turning Off Note Guide Use the following procedure to turn off note guide, which sounds the note to be played next in Lesson 2 and Lesson 3. 1. Press (FUNCTION) and then use the (10-key) [4] (U) and [6] (I) keys to display “LESSON” (page EN-7). 2. Press (10-key) [9] (ENTER) key. 3. Use the (10-key) [4] (U) and [6] (I) keys to display “NoteGuid”.
Using Built-in Songs to Master Keyboard Play Using Auto Step Up Lesson With Auto Step Up Lesson, the Digital Piano advances through each lesson automatically. 1. Select the song and part you want to practice (page EN-26). ■ Auto Step Up Lesson Procedure Phrase 1 Lesson 1 4 Lesson 2 4 Lesson 3 2. Press . 4 Listen to the first phrase in Lesson 1. • In Lesson 1, the sample phrase is played only once before advancing to Lesson 2. 3.
Music Challenge Keyboard Game bn bo bp 2 7 cq Music Challenge is a game that measures your reaction speed as you press keys in response to on-screen keyboard indicators and fingering guide indications. 1. Press (SONG BANK). 4. The game ends when you advance successfully through 20 notes. • Your playing time appears on the display. After a short while, the playing time display changes to a score. To clear the score from the display, press (SONG BANK), (RHYTHM), or (TONE).
Using Auto Accompaniment bn bo bp bq 345678 br 9 With Auto Accompaniment, simply select an accompaniment pattern. Each time you play a chord with your left hand the appropriate accompaniment will play automatically. It’s like having a personal backup group along with you wherever you go. • Auto Accompaniments are made up of the following three parts. (1) Rhythm (2) Bass (3) Harmony You can have only the rhythm part play, or you can have all three parts play at the same time.
Using Auto Accompaniment 5. Pressing again returns to rhythm only Playing All Parts accompaniment. Auto Accompaniment with Chords Playing a chord with your left hand automatically adds bass and harmony accompaniment parts to the currently selected rhythm. It is just like having your own personal back up group on call. 1. Start play of the Auto Accompaniment rhythm part. 2. Press . This enables chord input on the accompaniment keyboard.
Using Auto Accompaniment ■ FINGERED 1, 2, and 3 With these three input modes, you play chords on the accompaniment keyboard using their normal chord fingerings. Some chord forms are abbreviated, and can be fingered with one or two keys. See page EN-75 for information about chords that are supported and how they are fingered on the keyboard. Accompaniment keyboard ● FINGERED 1 Play the component notes of the chord on the keyboard. ● FINGERED 2 Unlike FINGERED 1, 6th input is not b possible.
Using Auto Accompaniment Using Auto Accompaniment Effectively Auto Accompaniment Pattern Variations ■ Auto Accompaniment Fill-in Use the procedure below to play a fill-in pattern during a performance. • A “fill-in” is a short phrase played where you want to change the mood of a piece. A fill-in pattern can be used to create a link between two melodies or an accent. • Normal and variation patterns have their own unique fill-in patterns.
Using Auto Accompaniment ■ Using Synchro Start Use the following procedure to configure the Digital Piano to start Auto Accompaniment play as soon as you press a keyboard key. 1. Press . Adjusting the Accompaniment Volume Use the following procedure to adjust the balance between what you are playing on the keyboard and the volume of the Auto Accompaniment. 1. Press (FUNCTION) and then use the This enters accompaniment start standby.
Using Auto Accompaniment Type number Using Auto Harmonize Auto Harmonize automatically adds harmony to notes you play with your right hand, which adds rich depth to the melody of your performances. You can select from among 12 types of Auto Harmonize to suit the type of music you are playing. • Auto Harmonize is controlled using the same button as the Arpeggiator (page EN-56). Because of this, these two functions cannot be used at the same time. 1.
Using Auto Accompaniment Looking Up the Notes of Chords (Chord Book) You can use the Chord Book to look up chords that you do not know how to play. 1. Hold down until the message “ChordBk” 3. Use the (10-key) [–] and [+] keys to select the type of chord you want. Selecting a chord type causes the chord to sound, and shows the chord name and its notes on the display. Example: Selecting M (Major) Chord type appears on the display. Ch o r dBk M (Ma j o r ) 2.
Editing Auto Accompaniment Patterns bo 345678 ■ Editable Contents • • • • • • • ■ Editable Accompaniment Patterns and Instrument Parts Any of the following parts that make up each rhythm that is assigned a rhythm number can be edited. Accompaniment patterns (intro, fill-in, etc.): 6 types Instrument parts (drum, bass, etc.): 8 types 1. Select the number of the rhythm you want to edit. I N NF V VF E Button ENDING VARIATION FILL-IN VARIATION NORMAL FILL-IN NORMAL INTRO 2. Press .
Editing Auto Accompaniment Patterns 3. Press a button from to to select the 7. To edit the other contents, press Accompaniment Pattern you want to edit. (FUNCTION) to display the screen for the setting you want. The name of the pattern will appear on the display. D rm : Rh • Each press of (FUNCTION) will cycle through the settings shown below, from 1 through 6. • Use the (10-key) [–] and [+] keys to change the currently selected setting.
Editing Auto Accompaniment Patterns 11-1.Press the (10-key) [–] key to exit without saving. To delete saved data The following procedure cannot be performed while an Auto Accompaniment editing (rhythm edit) operation is in progress. This displays the delete confirmation message. Press the (10-key) [+] key to exit the editing procedure. 1. Press (FUNCTION) and then use the 11-2.Press the (10-key) [+] key to save the data.
Saving Keyboard Setups to Registration Memory bo br cl cm cn co cp cq Registration memory lets you store Digital Piano setups (tone, rhythm, etc.) for instant recall whenever you need them. Registration memory simplifies performance of complex pieces that require successive tone and rhythm changes. You can have up to 32 setups in Registration memory at one time. and to are used for recording.
Saving Keyboard Setups to Registration Memory To save a setup to registration memory 1. Press (RHYTHM). To recall a setup from registration memory 1. Press to select the bank that contains the setup you want to recall. Bank number Bank 6 2. Configure the tone, rhythm, and other settings 2. Use buttons to to select the area whose you can to include in the setup. setup you want to recall. 3. Press to select the bank you want. Each press of cycles through the bank numbers.
Recording Your Keyboard Play bn bo bp 78 bk The recorder feature lets you record your keyboard play. br cl cm cn co cp cq 4. Configure the tone, rhythm, and other settings you want to use. Recording and Playing Back Keyboard Play Use the following procedure to record everything you play on the keyboard. 1. Press (RHYTHM). 2. Press . Lights 5. Start playing. Recording starts as soon as you play something on the keyboard. • You can use Auto Accompaniment while playing.
Recording Your Keyboard Play 8. Press twice to exit the recorder mode. Disappears Using Tracks to Record and Mix Parts You can divide a song according to various types of parts (instrument, left and right hand, etc.), and record each part to a specific track. You can mix up to six tracks (the original track plus five additional tracks) into a final song. ■ About tracks • The flashing on the screen shown in step 3 becomes faster when remaining recorder memory capacity becomes less than 100 notes.
Recording Your Keyboard Play 3. Press a button from to to select the track number of the next track to which you want to record. This will enter record standby for the track you selected. Example: Track 2 Flashes 7. After you finish recording all of the tracks, press . • This will start playback of the recorded tracks. Press to stop or restart playback. • At this time you can turn off playback of specific tracks using buttons to .
Recording Your Keyboard Play Recording Two or More Songs, and Selecting One for Playback You can record up to five songs (numbered 1 through 5) in memory. After that, you can select a specific song for playback. 1. Press (RHYTHM). 2. Press . A song number will appear in the upper left corner of the display for a few seconds. While it is, use (10-key) to specify the number of the song you want to record or play back. The song number will disappear if you do not perform any operation.
Recording Your Keyboard Play 5. Press to cycle through the parts in the sequence shown below. Saving Recorded Data on an External Device You can save data you record with the Digital Piano onto a memory card or on your computer’s hard disk. In the case of a memory card, you can save recorded song data as a standard MIDI file (SMF 0 format). Right-hand Recording Left-hand Recording ■ To save data to a memory card See page EN-60.
Other Useful Digital Piano Functions bn bo bp br ck ct Changing the Scale of the Keyboard You can use the following procedure to select from among 17 preset scales, including the standard Equal Temperament. No.
Other Useful Digital Piano Functions Using the Current Scale Notes for Auto Accompaniments You can use the following procedure to reflect the preset scale you selected in Auto Accompaniments. 1. Press (FUNCTION) and then use the (10-key) [4] (U) and [6] (I) keys to display “OTHER” (page EN-7). Using Music Preset Selecting a Music Preset instantly changes the Digital Piano to a preset setup (tone, rhythm, tempo, etc.) for play of songs of various genres/categories.
Other Useful Digital Piano Functions Type number Using the Arpeggiator The Arpeggiator makes it possible to play an arpeggio pattern automatically. There are 90 different arpeggio patterns from which to choose in order to match the music you are playing.
Other Useful Digital Piano Functions Deleting User Song Data You can use the following procedure to delete user song data stored as song numbers 153 through 162. 1. Press (FUNCTION) and then use the (10-key) [4] (U) and [6] (I) keys to display “DELETE” (page EN-7). Flashes DELETE Deleting All Data in Digital Piano Memory Use the following procedure when you want to delete sampled sounds, user songs and all other data, except for recorded songs, currently in Digital Piano memory.
Using a Memory Card bq br ck 7 You can save Digital Piano user area data to a memory card and load data from a memory card to Digital Piano memory. You also can play music files (MIDI files) stored on a memory card on the Digital Piano. • Use an SD memory card or an SDHC memory card with a capacity of 32GB or less. Use of a memory card with a capacity that is greater than 32GB and other types of memory cards is not supported. • SDHC Logo is a trademark of SD-3C, LLC.
Using a Memory Card Inserting and Removing a Memory Card Formatting a Memory Card • Note that the memory card must be oriented correctly when you insert it into the memory card slot. Trying to force the memory card into the slot can damage the card and the slot. 1. With the top of the memory card facing upwards (so you can see it), carefully insert the card into the Digital Piano’s memory card slot ( ) until stops with a click.
Using a Memory Card Saving Digital Piano Data to a Memory Card Use the following procedure to save Digital Piano data to a memory card. 1. On the Digital Piano, select the data you want to save as described below. To save this type of data Do this Sampled sound Select the tone number of the sampled sound you want to save. User rhythm Select the rhythm number of the user rhythm you want to save. Recorded song Select the song you want to save and put the Digital Piano in playback standby.
Using a Memory Card • You can input the following characters in a file name. 0 A K U ( 1 2 3 B C D L M N V W X ) - ^ 4 E O Y { 5 6 F G P Q Z S } @ 7 H R & ~ 8 I S _ ` Loading Data from a Memory Card into Digital Piano Memory 9 J T ' Use the following procedure to load data from a memory card into Digital Piano memory. • The Digital Piano displays the “~” character as “3”. 1.
Using a Memory Card 5. Press the (10-key) [9] (ENTER) key. ******** Flashes • Pressing [7] (EXIT) will return to the screen that was displayed before you pressed [9] (ENTER). 6. Use the (10-key) [–] and [+] keys to select Deleting Data from a Memory Card Use the following procedure to delete data saved on a memory card. 1. On the Digital Piano, select the data you want to delete as described below. To delete this type of data Sampled sound Select the tone number of the sampled sound.
Using a Memory Card 5. Press the (10-key) [9] (ENTER) key. ******** Playing Back Data from a Memory Card You can use the following procedure to play back user song data (page EN-58) directly from a memory card. Flashes • Pressing [7] (EXIT) will return to the screen that was displayed before you pressed [9] (ENTER). 6. Use the (10-key) [–] and [+] keys to select the number of the data (file) you want to delete. 7. Press the (10-key) [9] (ENTER) key.
Connecting External Devices br ck 8 Connecting to a Computer You can connect the Digital Piano to a computer and exchange MIDI data between them. You can send play data from the Digital Piano to commercially available music software running on your computer, or you can send MIDI data from your computer to the Digital Piano for playback. Minimum Computer System Requirements The following shows the minimum computer system requirements for sending and receiving MIDI data.
Connecting External Devices 5. Configure the music software settings to select “CASIO USB-MIDI” as the MIDI device. • For information about how to select the MIDI device, see the user documentation that comes with the music software you are using. • Be sure to turn on the Digital Piano first before starting up your computer’s music software. MIDI Settings Keyboard Channel A keyboard channel is the channel used for sending Digital Piano data to a computer.
Connecting External Devices 4. Use the (10-key) to specify the navigate (R) channel. Local Control There are times when exchanging data with a computer when you may not want the Digital Piano to sound notes you play on its keyboard. The local control setting lets you do just that. This also will automatically configure the next lower channel number as the navigate (L) channel.
Connecting External Devices Storing and Loading Digital Piano Memory Data You can transfer sampled sounds, recorded songs, and other data in Digital Piano memory to a computer for storage. You also can load standard MIDI file (SMF) data, and Auto Accompaniment data you download from the CASIO website to the Digital Piano, which greatly expands the Song Bank songs and Auto Accompaniment patterns available to you.
Connecting External Devices Connecting to Audio Equipment This Digital Piano can be connected to commercially available stereo, amplifier, or recording equipment, to a portable audio player or other equipment. Outputting Digital Piano Notes to Audio Equipment Connection requires commercially available connecting cables, supplied by you. The connecting cables should have a stereo standard plug on one end and a plug that matches the configuration of the external device on the other end.
Reference Troubleshooting Symptom Action Included Accessories I can’t find something that should be here. Carefully check inside all of the packing materials. Power Requirements Power will not turned on. Correctly attach the AC adaptor (page EN-9). The display lights up momentarily but power does not turn on when I press the P (POWER) button ( ). Press firmly and completely to turn on power. Display On-screen keyboard keys or notes remain on the display.
Reference Symptom Action Output volume does not change even though is change my keyboard touch. • Change the Touch Response setting (page EN-11). • Turn power off and then back on to initialize all Digital Piano settings (page EN-10). This is due to system limitations. It does not indicate malfunction. In certain keyboard ranges, the volume and tone quality sound are slightly different from those in other keyboard ranges. With some tones, octaves do not change at the far ends of the keyboard.
Reference Specifications Model Keyboard Touch Response Maximum Polyphony CDP-240RBK 88-key piano keyboard 3 types, Off 64 notes (32 for certain tones) Tones Built-in Tones 700 Sampling Tones Up to 8 (Melody Sampling: 5, Drum Sampling: 3)* Up to 10 seconds Functions Layer, Split, Piano/Organ button Hall On, Off Reverb 1 to 10, Off Chorus 1 to 5, Off Metronome Beats per Measure 0, 1 to 9 Tempo Range 30 to 255 Song Bank Built-in Songs 152 User Songs Up to 10* Step Up Lesson Lessons 4 (L
Reference Inputs/Outputs USB port TYPE B Sustain/Assignable jack Standard jack (sustain, sostenuto, soft, rhythm) Phones/Output jack Stereo standard jack Output Impedance: 3Ω, Output Voltage: 1.
Reference Error Messages Display Message Cause Action Err CardFull There is not enough room available on the memory card. Err Card R/W The memory card is damaged. Use a different memory card. Err Convert There is not enough unused memory available to save recorded song data to a memory card as an SMF 0 format file. Delete some or all of the following user data from memory to make room for new data.
Reference Song List SONG BANK 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 EN-74 WORLD TWINKLE TWINKLE LITTLE STAR LIGHTLY ROW LONG LONG AGO ON TOP OF OLD SMOKEY SAKURA SAKURA WHEN THE SAINTS GO MARCHING IN AMAZING GRACE AULD LANG SYNE COME BIRDS DID YOU EVER SEE A LASSIE? MICHAEL ROW THE BOAT ASHORE DANNY BOY MY BONNIE HOME SWEET H
Reference Fingering Guide Fingered 1, Fingered 2 Chords Fingered 3, Full Range Chords In addition to the chords that can be fingered with Fingered 1 and Fingered 2, the following chords also are recognized. C # C C Cm Gm Am C C D C E C F C b Bm C G C Ddim C b A C b B C b A7 C B C F7 C # Cm C Fm7 C Dm C Gm7 C Fm C b A add9 C Cdim Caug *3 Csus4 *3 Csus2 *3 • With Fingered 3, the lowest note fingered is interpreted as the base note.
Key’s Ch’s After Touch Control Change Pitch Bender Note ON Note OFF Velocity True voice 0, 32 1 6, 38 7 10 11 64 O X O *2 O O X O *3 O X X O 9nH v = 1 - 127 X 9nH v = 0 0 - 127 O (MSB only) O O *2 O O O O O X O O 9nH v = 1 - 127 X 9nH v = 0, 8nH v =** 0 - 127 0 - 127 *1 Mode 3 X Mode 3 X Default Messages Altered Mode Note Number 1 - 16 1 - 16 1 1 - 16 Recognized Default Changed Transmitted MIDI Implementation Chart Basic Channel Function Model: CDP-240R Bank select Modulation
:True # : Clock : Commands : All sound OFF : Reset all controller : Local ON/OFF : All notes OFF : Active Sense : Reset System Real Time Aux Messages Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY Remarks : Song Pos : Song Sel : Tune System Common System Exclusive Program Change 66 67 91 93 100, 101 Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO Sostenuto Soft pedal Reverb send *4 Chorus send RPN LSB, MSB O : Yes X : No *1 : Dépend de la sonorité.
This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Ce sigle signifie que l’emballage est conforme à la législation allemande en matière de protection de l’environnement.
