User manual

4–8 • Configuration CDP-100 User Manual (Iss. 03)
To manually specify the date and time
1. From the Time Source area, select Manual. Use this option when neither Network Time
or an LTC source are available.
2. Using the options in the Manual area, specify the date and time.
3. Click Accept to apply your changes.
Using an NTP Server as the Time Source
In order to use network time, you also need to ensure that the MFC-8300 Series Network
Controller card in the openGear frame has been configured to acquire time from an NTP server.
Refer to the MFC-8300 Series User Manual for details.
If you do not have access to an NTP server, you can use LTC or enter the time and date directly on
the Time tab as described in the section “To manually specify the date and time” on page 4-8.