Computer Digital Camera User's Guide CASSIOPEIA

5. Start up your computer (which should have PC Connect installed on it), start up PC

Connect, and establish a connection between the computer and your CASSIOPEIA.

6. Tap [PC Connection].

• This establishes a connection between your CASSIOPEIA and computer. In response

to the dialog box that appears to ask if you want to start up by restoring backup data,

tap [OK].

• The following steps are performed in PC Connect on your computer.

7. Place the CD-ROM that came bundled with your CASSIOPEIA into your computer’s

CD-ROM drive.

8. On the PC Connect initial screen, select [Restore] on the [Tool] menu.

• This displays the [Restore] dialog box.

9. Select the [Restore factory defaults], and then click [OK].

• This starts restoration, which is indicated by messages on the screens of your

CASSIOPEIA and computer.

• After restoration is complete, a message appears on your computer screen asking if

you want to restart your CASSIOPEIA.

10.Click [OK].

• This restarts your CASSIOPEIA.

• On your CASSIOPEIA, perform the steps under “What to do if resetting does not

solve the problem” on page 35.