User`s guide

3.3 The Signature Capture Mode

Tap the Signature Capture icon on the menu bar and aim the unit

at the Code 39 bar code on the Signature Capture sample located

on page 2 of Appendix B. Based on the location of the bar code,

the software then transmits the area of the image that contains the

signature block.

The Signature Capture option allows you to capture both bar code

data and a signature with the single press of a button. This

method reduces transfer time and file size while making signature

capture easy. First the bar code data is decoded and sent to the

host; then the host sends a command for the image to be captured

and transmitted.

This Signature Capture demonstration uses Intelligent Imaging

Technology from HHP. Please refer to Page 12 of this User

Guide for the Intelligent Imaging setup instructions.

3.4 Saving Captured Images

Images can be saved in any of three file formats: Bitmap

Grayscale (bmp), JPEG Grayscale (jpg) or TIFF Grayscale (tif).

However, the file format to be used must be specified before the

image is captured. Please see Page 10 for detailed instructions.