User`s manual

V. PDA REQUIREMENTS

The Scan Tool software supports the following WIN CE/PocketPC devices*.

IMPORTANT: All devices must be running Windows CE 3.0 or higher, Pocket PC 2002 or Pocket PC 2003 and

they must have an SH3, MIPS, StrongARM or X-Scale processor.

 HP Jornada Pocket PC- All series

 IPAQ pocket PC- All series

 Audiovox Maestro Pocket PC’s

 Intermec Pocket PC’s

 Symbol PDT & PPT Pocket PC’s

 Toshiba e570 Pocket PC

 Casio Cassiopeia E-200 series, E-125, EG-800 Series, EM 500 Series, IT-70 Series, IT-700 Series

 Dell Axim X5

If your PDA is not listed, contact EASE for more information at 888-366-3273. If your PDA is running Windows

CE Version 3.0, Pocket PC 2002 or Pocket PC 2003, has an SH3, StrongARM or X-Scale processor, and has a

serial (9-pin) cable, then it should work with the EASE WIN CE Scan Tool software.

How do I know what version of Windows CE and which processor my PDA is using?

To determine what version of Windows CE and which processor it is using do the following.

From the Start menu choose Settings.

2. Tap on the System tab on the bottom of the Settings Screen.

Tap the About icon.

4. Tap the Version tab on the bottom of the About Screen.

In the About screen the Microsoft Windows CE version is listed and the Processor. If your

PDA is running Windows CE Version 3.0 or Pocket PC 2002 and has an SH3 or StrongARM

processor then it should work with the EASE WIN CE Scan Tool software.

*IMPORTANT: In addition to a supported device, the Scan Tool software requires a

serial (9-

pin) cable to connect the PDA Vehicle Interface to the WIN CE/Pocket PC Device. If you use

a docking cradle or a USB cable to transfer files between the desktop PC and WIN

CE/Pocket PC Device, you must purchase a serial cable for your device in order to use the

Scan Tool software to connect to a vehicle. This cable is not the same for all manufacturers

or models. You must purchase the cable specified for your device. A list of supported WIN

CE/Pocket PC models and their correct serial cable part numbers is listed in Appendix A.