User`s manual

11.4 Step-by-Step Instructions for Uploading a File To The PC Scan Tool

1. Connect the CE device to the PC COM port using a serial cable or cradle.

IMPORTANT: Microsoft Active Sync cannot be configured to use the PC port that you are connecting the

CE Device to.

2. In the EASE PC Scan Tool OBD II Generic Scan Tool software, open the Data Logger Screens by

clicking the Data Logger icon from the toolbar. Go to the Retrieve Recorded Data tab screen.

3. In the WIN CE Scan Tool Recordings Screen, tap the recordings you want to upload to the PC Scan

Tool and then tap the Upload button. Multiple recordings can be selected and uploaded at the same

time

4. The uploaded recordings will be displayed in the Data Logger’s Retrieve Recorded Data tab screen on

the PC.

5. Recordings can be viewed and saved using the PC Scan Tool.

12.0 Reset Scan Buffer

Tap on the Reset Scan Buffer icon to reset or clear the scan buffer. When the scan tool is scanning real time

vehicle data, it stores previous scan data in a buffer so that the user can quickly review it in the graphs screen.

Select this button to clear all the frames of data from the data buffer. This will reset the frame number counter.

13.0 Preferences Screen

This screen allows the user to set program preferences.

Unit Display – Parameter units can be displayed in English or Metric. Tap on the circle

next to your desired unit of measure.

Product Access – Tap this button to open the Product Access Screen. See Section VII.

for more information.

Word Wrap – If a data parameter or DTC description is too long to fit on a single line in

the Real Time Data Grid or DTC Library, the text will wrap into multiple lines so that the

entire name is shown in the grid. To turn off this feature, deselect this checkbox. When

this feature is turned off all descriptions are limited to a single line and you may not be

able to see the entire description.

Create Dump File – You may be directed by technical support to use this feature.

14.0 Safety Precautions Screen

After starting the Scan Tool Software, the user is first informed of safety precautions to

follow when working around vehicles. Tap on the Ok button to continue. See Section I

Safety Precautions for a listing of vehicle safety precautions.

IMPORTANT: NEVER ATTEMPT TO OPERATE THIS SOFTWARE AND DRIVE THE

VEHICLE AT THE SAME TIME.

15.0 Exit Program

To exit the Program, select [Vehicle]\Exit from the menubar.