User`s manual

10.0 Recording Vehicle Data
The Scan Tool Software can record, playback and save an unlimited amount of vehicle data. While connected
to a vehicle, tap on the record icon in the bottom tool bar to enter record mode. The bottom part of the toolbar
will change to indicate that the scan tool is in record mode. Saved recording files can be played back with the
CE Scan Tool or exported and played back using the EASE PC Scan Tool Software.
10.1 Step-by-Step Instructions for Recording Data
1. Connect to the vehicle.
2.
Go to the Data Grid and Add the parameters that you want to record.
3.
Tap the record icon to enter record mode (Important: The software is not recording data at this
time)
4. Tap the record button in the record toolbar to start recording.
5.
Tap the save button to save the recording.
10.2 Record Toolbar
The bottom menu of the software changes depending on what mode the software is in. When the record icon
is tapped, the record toolbar is displayed. The record icon is only selectable when the software is connected to
a vehicle.
Scanning Data Mode Record Toolbar – Pause Mode Record Toolbar – Record Mode
Record Icon – Tap on this icon to enter record mode. The record icon is only selectable when the
software is connected to a vehicle.
Record Data Button – Tap this button to start or resume recording vehicle data.
Pause Indicator – This indicator flashes when the software is paused in record mode. The software
is not recording data at this time.
Record Indicator – This indicator flashes when the software is recording vehicle data.
Pause Button - Tap on this button to pause the current recording.
Save Button – Tap on this button to save the record session.
10.3
Save Recording Screen
Tap on the Save button to save the current record session. The Save Recording screen
will be displayed. In this screen you can assign the recording name and enter notes on
the recording.
Default Button – Tap on the Default button to name the current recording with a
default name. The default name consists of the current date and time. To name the
recording otherwise, enter the desired name in the box below the Default button.
Notes – You can enter notes on the record session here.
Existing Recordings – All recordings currently saved in the PDA are listed here.
Save button – Tap on the Save button to save the recording.
Cancel button – Tap on the Cancel button to exit the screen without saving the current recording.
22