User`s manual

X. SETUP PROCEDURES
NOTICE
THIS PRODUCT IS DESIGNED TO OPERATE AT A VEHICLE’S NORMAL BATTERY VOLTAGE: 11-15
VOLTS DC. ANY OTHER VOLTAGE MAY DAMAGE THE EASE POCKETSCAN TOOL UNIT!
This section includes the following:
1. What comes with an EASE PDA Scan Tool?
2. Step by step instructions for setting up the EASE PDA Scan Tool
a. Connecting EASE PDA Scan Tool to a WIN CE/Pocket PC device
b. Connecting the EASE PDA Scan Tool to the Vehicle
c. Using the EASE PDA Scan Tool Software to scan vehicle data.
1.0 What Comes With An EASE PDA Scan Tool Package?
An EASE PDA Scan Tool Package is provided with the following:
EASE PDA Vehicle Interface – Black interface box
with a DB25 pin connector on one end and a DB9
pin connector. This unit can be used to connect to
all OBD II compliant vehicles.
Vehicle Interface Cable (CABLE-OBD II) – A cable
with an OBD II connector on one end and a DB25 on
the other. This cable is used to connect to the
vehicle’s diagnostic connector.
Installation Software – Software used to install the
PDA Scan Tool on the PDA Device.
2.0 Step-By-Step Instructions For Setting Up The EASE PDA Scan Tool
The EASE PDA Vehicle Interface must be connected between the vehicle and PDA device to operate. The
following sections explain how to make the proper connections.
11