Hardware manual
Table Of Contents
- Safety Precautions
- Operating Precautions
- Contents
- Getting Ready
- Operations
- General Guide
- Using the Stylus
- Recalibrating the Touch Screen
- Adjusting Display Brightness
- Adjusting Auto Dimming Settings
- Changing Applications Assigned to the Program Button
- Using the Cradle
- Using the CASSIOPEIA USB Cable
- Using the AC Adapter
- Infrared Communication
- Using a CompactFlash Card
- Using an SD Memory Card or Multimedia Card
- Built-in Storage
- Using a PC Card Unit (Option)
- Using the PC Card Unit as an External Power Supply
- About the 20Pin/USB host Converter (Option)
- About the Modem Adapter and Modem Card (U.S. and Canada Only)
- Software Applications
- User Maintenance
- Troubleshooting
- Appendix
32
1. Make sure your CASSIOPEIA is turned off.
• Press the power button to turn off power.
2. Turn the CASSIOPEIA over.
3. Slide the battery cover switch to BACK UP, and then remove the backup battery
cover.
4. Remove the old battery.
5. Wipe off a new lithium battery (CR2032) with a dry cloth, and load it into the
CASSIOPEIA.
Make sure the positive side is facing up, so you can see it.
6. Replace the backup battery cover.
7. Slide the battery cover switch back to LOCK.
Battery cover switch