Hardware manual
Table Of Contents
- Safety Precautions
- Operating Precautions
- Contents
- Getting Ready
- Operations
- General Guide
- Using the Stylus
- Recalibrating the Touch Screen
- Adjusting Display Brightness
- Adjusting Auto Dimming Settings
- Changing Applications Assigned to the Program Button
- Using the Cradle
- Using the CASSIOPEIA USB Cable
- Using the AC Adapter
- Infrared Communication
- Using a CompactFlash Card
- Using an SD Memory Card or Multimedia Card
- Built-in Storage
- Using a PC Card Unit (Option)
- Using the PC Card Unit as an External Power Supply
- About the 20Pin/USB host Converter (Option)
- About the Modem Adapter and Modem Card (U.S. and Canada Only)
- Software Applications
- User Maintenance
- Troubleshooting
- Appendix
20
To remove the CASSIOPEIA from the cradle
Pull up on the CASSIOPEIA so the recess on its back disengages from the raised part
of the cradle, and then lift the CASSIOPEIA straight up from the cradle.
2
1
To connect another USB device to the cradle
The cradle is equipped with a USB-A connector that can be used to connect another
USB device, as shown below.
• When using any USB device, make sure you install the applicable USB driver on
your CASSIOPEIA.
USB device
Computer
CASSIOPEIA
Cradle
USB-A connector