Hardware manual
Table Of Contents
- Safety Precautions
- Operating Precautions
- Contents
- Getting Ready
- Operations
- General Guide
- Using the Stylus
- Recalibrating the Touch Screen
- Adjusting Display Brightness
- Adjusting Auto Dimming Settings
- Changing Applications Assigned to the Program Button
- Using the Cradle
- Using the CASSIOPEIA USB Cable
- Using the AC Adapter
- Infrared Communication
- Using a CompactFlash Card
- Using an SD Memory Card or Multimedia Card
- Built-in Storage
- Using a PC Card Unit (Option)
- Using the PC Card Unit as an External Power Supply
- About the 20Pin/USB host Converter (Option)
- About the Modem Adapter and Modem Card (U.S. and Canada Only)
- Software Applications
- User Maintenance
- Troubleshooting
- Appendix
17
Adjusting Display Brightness
Use the following operations to adjust display brightness to make it easier to read.
• Tap
and then Settings. On the System tab, tap Brightness. On the dialog box that
appears, tap the Brightness tab.
• While holding down the [Action] button, press the right side of the cursor button to
make the screen brighter, or the left side of the cursor button to make it dimmer.
Adjusting Auto Dimming Settings
1. Tap and then Settings. On the System tab, tap Brightness.
2. On the dialog box that appears, tap the Auto Dim tab.
3. Follow the instructions that appear on the screen to make auto dimming settings.
• You can make separate auto dimming settings for battery power and AC adapter
power by selecting the appropriate check box.
• You can set up the CASSIOPEIA so the front light turns back on whenever you press
a button or tap the screen while it is turned off.
Changing Applications Assigned to the Program Button
• Tap and then Settings. On the Personal tab, tap Button, and then follow the
instructions that appear on the display.