User's Manual

Synthesizer Mode
E-44
z Vibrato Delay (Range: –64 to 00 to +63)
Specifies the amount of time before vibrato starts.
z Vibrato Rate (Range: –64 to 00 to +63)
Rate (speed) of the vibrato effect
z Vibrato Depth (Range: –64 to 00 to +63)
Depth of the vibrato effect
z Octave Shift (Range: –2 to 0 to +2)
Up/down octave shift
z Level (Range: 000 to 127)
This parameter controls the overall volume of the tone. The
greater the value, the greater the volume. Setting a level of
zero means that the tone does not sound at all.
 Touch Sensitivity (Range: –64 to 00 to +63)
This parameter controls changes in the volume of the tone in
accordance with the pressure applied to the keyboard keys. A
greater positive value increases the volume of the output as
pressure increases, while a negative value decreases volume
with increased keyboard pressure. A setting of zero specifies
no change in output volume in accordance with keyboard
pressure.
z Reverb Send (Range: 000 to 127)
This parameter adjusts reverb.
z Chorus Send (Range: 000 to 127)
This parameter adjusts chorus.
z DSP Line (Settings: on, oFF)
This parameter controls whether or not the DSP effect is used.
Use the DSP editing screen to select the DSP type and to edit
parameters.
1. Select a tone, press the SYNTH button, and then
configure parameter settings.
2. After everything is the way you want, press the
[ ] CURSOR button once. This advances to the
DSP parameter editing screen.
Pressing the [ ] CURSOR button returns to the Synthesizer
Mode parameter screen.
This setting specifies DSP parameters. See “DSP Parameters”
on page E-24, “Effect List” on page A-13, and “DSP Algorithm
List” on page E-83 for more information.
• If you store an original tone with the DSP line turned on (see
next page), simply recalling the tone automatically changes
the DSP line, DSP type, and DSP parameter settings. This
simplifies the recall of original tones that include a DSP
effect.
• An indicator appears next to DSP on the display while you
are making DSP type or DSP parameter settings.
VDla
y
ebi
V . ateRbi
VD
p
thebi
OSifthtc
Lelve
T S nseehc
DSP Settings
R endSbv
C endSoh
D ineLPS
707A-E-046A
CTK900_e.book 44 ページ ２００５年３月９日 水曜日 午後５時２９分