User's Manual

E-37
Mixer Function
3. Press the [ ]/[ ] CURSOR buttons to display
the on/off selection screen.
4. Use the [
+
]/[–] buttons to select on or off.
Example:
To turn the channel off.
• Press the [ ] CURSOR button to return to the
channel selection screen.
• Pressing the MIXER button returns to the Tone Screen.
• The MIDI data display shows only the data for the channels
selected with the Mixer.
The following describes what happens and what appears on
the display when you turn a channel on or off.
z On (on)
This setting turns on the currently selected channel, which is
indicated by a bar appearing at the bottom of the level meter
for that channel. This is also the default setting for all channels
when the keyboard is turned on.
z Off (oFF)
This setting turns off the currently selected channel, which is
indicated by the absence of the bar at the bottom of the level
meter for that channel.
1
On
2
Off
In the Parameter Edit Mode, you can change the settings of
ten different parameters (including tone, volume, and pan
pot) for the channel you selected on the Mixer screen.
1. Press the MIXER button.
• This causes a pointer to appear on the display next to
MIXER.
2. Use the [ ] and [ ] CURSOR buttons to select
the channel you want.
3. Use the [ ] and [ ] CURSOR buttons to select
the parameter whose setting you want to change.
Example:
Select volume setting by displaying “Volume”.
• Each press of the [ ] or [ ] CURSOR buttons cycles
through the parameters.
• You can use the [ ] and [ ] CURSOR buttons to
change to another channel at any time during this
procedure.
1
Indicates channel volume of 127
4. Use the number buttons or [
+
] and [–] to change
the parameter setting.
Example:
Change the setting to “060”.
• Pressing the MIXER or EXIT button exits the
parameter edit mode.
How Channel On/Off Works
Cnelnah
Cnelnah
21
Using the Parameter Edit Mode
Editing the Parameters for Channels 1
through 16
To change parameters
Vuemlo
1
Vuemlo
707A-E-039A
CTK900_e.book 37 ページ ２００５年３月９日 水曜日 午後５時２９分