User's Manual

English
Assembling the Stand
E-31
7. Use the two screws
H
to secure the piano to
the stand.
IMPORTANT!
• The screws keep the piano from slipping off the
stand. Never use the piano without the screws
installed.
8. Affix the adaptor cord clip
K
next to the
power terminal (DC12V).
• For information about securing the cord, see “Power
Outlet” on page E-4.
1. Orienting the pedal plug as shown in the
illustration, plug it into the pedal connector on
the bottom of the piano.
• Secure the pedal cord with the clip
G
.
1. Install the music stand by inserting its pegs
into the holes in the top of the piano.
H
K
DC 12V terminal
To connect the pedal cord
To install the music stand
G
Pedal plug