User's Manual

E-12

Playing with Different Tones

Press the METRONOME button.

• This starts the metronome.

• The lamp above the SONG a button flash in time

with the metronome beat.

To change the beat, hold down the

FUNCTION button as you press one of the

METRONOME BEAT keys to select a beat

setting.

• You can specify beats per measure value of 0, 2, 3, 4,

5, or 6. Specifying 0 as the setting plays a straight

click, without any chime. This setting lets you

practice with a steady beat.

While holding down the FUNCTION button,

use the TEMPO keys to specify a tempo

value in the range of 20 to 255 beats per

minute.

• Each press of the + or – key raises or lowers the

tempo value by 1.

• You can use the value input keys (0 to 9) to enter a

specific three-digit. Be sure to input all three digits.

Example: To enter “96”, press keys 0, 9, 6.

Press the METRONOME button or SONG

a button to turn off the metronome.

NOTE

• To return the tempo setting to the default tempo of

the currently selected Music Library tune, press the

+ and – keys at the same time in step 3. Pressing +

and – while recording will return the tempo value to

120.

To adjust the metronome volume

You can perform the following procedure at any time,

regardless of whether or not the metronome is

sounding.

While holding down the FUNCTION button,

use the METRONOME VOLUME keys to

specify a volume value in the range of 0 to 42.

• For details about using the keyboard keys for

settings, see “Keyboard Keys Used for Configuring

Settings” on page E-21.

• Each press of the T or S key raises or lowers the

metronome volume value by 1.

NOTE

• To return to the initial default setting, press T and

S at the same time.

Using the Metronome