Operation Manual

Others

● Is Original Lock for "Keypad dial" under "Dial/sending mail" set?

→

p.43

● Is Auto-key lock set? →p.43

● Is Restrict dialing set?

● Is Dial lock set? →p.43

● Is Self mode set?

Cannot make a call by pressing the dial keys

● Reboot the power, or remove the battery pack or UIM then insert it again.

● Depending on the signal quality, you may not be able to make or receive calls even

if the signal strength icon shows "

" – " ". Move to another location and try again.

● Is Call rejection, Call acceptation, or another restriction applied?

● Depending on the network congestion, you may have difficulty talking or mailing

in crowded places. In this case, you see the message "Please wait" and hear the busy

tone. Move to a location and try again, or perform the operation later.

Calls cannot be made or received (" " does not disappear even after you move. /

You cannot make or receive calls despite the signal strength is enough.)

●

Are you holding the

mark of the FOMA terminal over a reader unit?

● Is IC card lock/Dial lock/Omakase Lock set?

● When the battery pack is removed, the IC card function cannot be used.

Osaifu-Keitai cannot be used

Warranty and After-Sales Service

Warranty

・

Make sure that a warranty is included when you purchase the FOMA terminal. Check the

content, information about "

販売店名・お買い上げ日

" (the shop, date of purchase), etc.

Keep the warranty card in a safe place. If the warranty card does not contain necessary

info

rmation, immediately contact the shop and request them to fill in the card. The

warran

ty is valid for one year from the date of purchase written on the warranty.

・ The product in whole or in part, including its accessories, is subject to improvement

without notice.