Operation Manual

Basic Operation
44
Type of Lock Function Setting procedure
Lock bar
setting
Lock the touchscreen to
prevent misoperations
while the FOMA terminal
is in Touch style and after
the touchscreen goes off.
To activate: is "Setting" s "Lock/Security"
s "Lock bar setting" s "ON"
To deactivate temporarily: In Touch style and when the touchscreen
is off
s n s Quickly slide on the lock bar to the right end
Setting incoming call restriction
Rejecting calls without caller ID
Set whether to accept or reject voice/videophone calls from unidentified numbers by
configuring the setting for each reason.
❶
is "Setting" s "Lock/Security" s "Call rejection set."
❷
Enter your security code s Select any item from "User unset" to "Wi-Fi (Unknown)" s "Accept" or "Reject"
If you select "Accept", you can set "Select ring tone" and "Select calling disp.".
・ The setting can be configured for each of the following reasons.
- User unset
： Calls made by callers who opt not to send caller ID
- Payphone
： Calls from pay phones, etc.
- Unknown
： From callers who are unable to provide the caller ID, such as calls from
overseas or calls from land-line phones sent via a call forwarding service
- Wi-Fi (Unknown) ： Wi-Fi voice calls without caller ID
Rejecting calls from numbers not stored in phonebook
Set whether to accept or reject calls from callers not in the phonebook.
❶
is "Setting" s "Lock/Security" s "Call rejection set."
❷
Enter your security code s "Reject unknown" s "Accept" or "Reject"
・ This function is valid only for calls with caller ID.
It is recommended that you also set "Caller ID request" and "User unset" in this function.