Operation Manual

Basic Operation
Charging
For the charging time and continuous talk time, refer to "Main specifications" (→ p.95).
・ The battery pack, AC adapter and provided desktop holder are not waterproof/
dustproof. Never charge the battery with the FOMA terminal left wet.
・ It is recommended that the desktop holder be used for charging to prevent water
from seeping inside and dust from getting in through the external connector terminal.
・ The charge lamp lights up when charging starts. The charge lamp turns off when charging ends (fully charged).
Charging using desktop holder
❶ Plug the connector of the AC adapter (optional) horizontally
to the terminal on the back of the provided desktop holder
Desktop Holder CA01
Charge lamp
With the arrow
side facing up
Connector
100V AC
power outlet
Plug
FOMA AC Adapter 01/02
❶
❷
❸
❷ Plug the AC adapter into the outlet
❸ Holding down the desktop holder, insert the FOMA terminal
in direction
① and securely attach it in direction ②
・ Take care not to pinch the strap, etc. when attaching it.
❹ When charging is complete, hold down the
desktop holder, then remove the FOMA
terminal in rev
erse procedure of attaching
Charging using AC adapter
❶ Open the external connector terminal cap of
the FOMA terminal (
→ p.20), then plug the AC
adapter connector horizontall
y into the FOMA
terminal's external connector terminal
100V AC
power outlet
Plug
FOMA
AC Adapter
01/02
Release
buttons
With the arrow
side facing up
Terminal cap
Connector
Charge lamp
❶
❷
❷ Plug the AC adapter into the outlet
❸ When charging is complete, remove the AC
adapter connector horizontally from the FOMA
term
inal while pressing the release buttons,
then unplug the AC adapter fr
om the outlet
24