Operation Manual

ManualsBrandsCasio ManualsphonesCA-01C

Using the Bluetooth® Function

⿟

To secure the Bluetooth communication

security, the FOMA terminal supports the

secu

rity function compliant with Bluetooth

stan

dards, but the security may not be sufficient

depe

nding on the setting. Concern about the

communication using the Bluetooth func

tion.

⿟

Please be aware th a t DOCO M O is not

responsible for data leak when making data

communications using Bluetooth.

⿟

You can use a headset, handsfree, audio, dial-

up communications, object push and serial

port on the

FOMA terminal. The audio/video

remo

te control may be available for audio.

(Only on compa

tible Bluetooth devices)

⿟

Frequency band

The following are frequency bands that the FOMA

terminal's Bluetooth function uses:

2.4 ：

The radio equipment uses the 2400MHz band.

FH ：

Modulation scheme is the FH-SS system.

1 ：

The estimated interference distance is 10 m or less.

：

The full band between 2400 MHz and 2483.5

MHz is used and the band of the mobile

identification device cannot be a

voided.

Bluetooth cautions

The operating frequency band of this equipment is

used by industrial, sc

ientific, consumer and medical

equipment including microwave ovens, premises

radio stations

for identifying mobile units used in the

manu

facturing lines of plants (radio stations requiring

a li

cense), specified low power radio stations (radio

stat

ions requiring no license) and amateur radio

stations (hereinaft

er referred to as "another station").

Before using this terminal, confirm that

"another station" is not being operat

ed nearby.

In the event of this terminal causing harmful

radio wave interference with "another stations",

promptly change the

operating frequency or stop

radio wav

e emission by turning off the power, etc.

If you have further questions, please contact

"General Inquiries" on the last page of this manual.

Using Wireless LAN (WLAN)

⿟

Wireless LAN ( WLAN) uses radio waves to enable

communications between compatible devices, thus

allowing connection to a local area network from anywhere

within range. However, there is a risk of data interception

by malicious third parties unless security is established

Use

rs are advised to assess their responsibilities and

accordingly configure security settings.

⿟

Wireless LAN

Do not use wireless LAN near magnetic devices such as

electrical appliances or AV/OA devices, or in radio waves.

⿠

Magnetism or radio waves may increase noises or disable

communications (especially when using a microwave oven).

⿠

When used near TV, radio, etc., reception interference may

occur, or channels on the TV screen may be disturbed.

⿠

If there are multiple wireless LAN access points nearby and

the same channel is used, search may not wor

k correctly.

⿟

Frequency band

Frequenc y band use d by W LAN device s is

indicated on the battery storage section. The

following are the descr

iptions:

① ② ③ ④

⑤

① 2.4 ： The radio equipment uses the

2400MHz band.

② DS ：

Modulation scheme is the DS-SS system.

③ OF ：

Modulation scheme is the OFDM system.

④ 4 ： The estimated interference distance

is 40 m or less.

⑤ ： The full band between 2400 MHz

and 2483.5 MHz is used and the

band

of the mobile identification

device cannot be avoided

⿠

Available channels vary depending on the country.

⿠

For use in an aircraft, contact the airline beforehand.

⿠

There are some regions or areas in the world in

which WLAN is not usable. If you use WLAN overseas,

you should k

now what frequencies will be available,

and about laws and regula

tions befor

ehand.

Introduction