Operation Manual
50
Result codes
■ Result codes related with data communication
■ Extended result codes
•&E0
•&E1
■ Communication protocol result codes
Number
indication
Character indication Description
0 OK Successfully executed.
1 CONNECT Connected.
2 RING Incoming call.
3 NO CARRIER Line disconnected.
4 ERROR Command not acceptable.
6 NO DIALTONE Unable to detect dialing tone.
7 BUSY Busy tone detected.
8 NO ANSWER Time out in connection completing.
100 RESTRICTION Network restricted.
101 DELAYED Redialing restricted.
Number
indication
Character indication Description
122 CONNECT 64000 Connected between the FOMA terminal and base station at 64,000bps.
125 CONNECT 384000 Connected between the FOMA terminal and base station at 384,000bps.
133 CONNECT 3648000 Connected between the FOMA terminal and base station at 3,648,000bps.
135 CONNECT 7232000 Connected between the FOMA terminal and base station at 7,232,000bps.
Number
indication
Character indication Description
5 CONNECT 1200 Connected between the FOMA terminal and PC at 1,200bps.
10 CONNECT 2400 Connected between the FOMA terminal and PC at 2,400bps.
11 CONNECT 4800 Connected between the FOMA terminal and PC at 4,800bps.
13 CONNECT 7200 Connected between the FOMA terminal and PC at 7,200bps.
12 CONNECT 9600 Connected between the FOMA terminal and PC at 9,600bps.
15 CONNECT 14400 Connected between the FOMA terminal and PC at 14,400bps.
16 CONNECT 19200 Connected between the FOMA terminal and PC at 19,200bps.
17 CONNECT 38400 Connected between the FOMA terminal and PC at 38,400bps.
18 CONNECT 57600 Connected between the FOMA terminal and PC at 57,600bps.
19 CONNECT 115200 Connected between the FOMA terminal and PC at 115,200bps.
20 CONNECT 230400 Connected between the FOMA terminal and PC at 230,400bps.
21 CONNECT 460800 Connected between the FOMA terminal and PC at 460,800bps.
Number
indication
Character indication Description
1 PPPoverUD Connected by PPPoverUD (BC=UDI, +CBST=116,1,0)
3 AV64K Connected by AV (Videophone) [64K]
5 PACKET Connected by Packet
NOTE
d The result code appears as character indication (default value) when ATV
n
command (p.47) is set to
n
=1, and as
number indication when the command is set to
n
=0.
d Though the communication speed appears in order to maintain a compatibility with the modem connected by
traditional RS-232C, it differs from the actual connection speed because the FOMA terminal and PC are connected
via FOMA USB Cable with Charge Function 02 (optional) or via Bluetooth Communication.
d "RESTRICTION" (Number indication: 100) indicates that the network is congested. If this is displayed, wait for a
while and then try again.
CA-01C_E_Manual_02.fm 50 ページ ２０１１年５月３日 火曜日 午後１２時３０分